Price Match GuaranteeKenmore Dryer 11096584120 Parts
Shop replacement repair parts for Kenmore Dryer model 11096584120
Dryer thermal fuse (or thermal limiter). This fuse is located on the exhaust duct. If the dryer overheats, the thermal fuse opens to cut off power to the dryer. The thermal fuse cannot be reset--if the thermal fuse is open, it must be replaced.
Motor pulley
Spring clip, knob
White Touch Up Paint
Screw, 10-24 x 1/2
Shaft for dryer drum support roller. Rear shaft with left hand threads. Part is updated so nuts may need to be replaced as well on older dryers.
Drive motor kit - Note; the wiring connections may be different, comes with instructions
Seal, blower cover plate. 26 in
Shaft for dryer drum support roller. Front shaft with right hand threads. Part is updated so nuts may need to be replaced as well on older dryers.
Lower panel retainer clip
Spring for idler pulley arm in dryer
Front panel foam seal with adhesive strip
Terminal block kit for electric dryer power cord, includes instructions
Screw, 10-16 x 7/8
High-limit thermostat, 2 wire, 250 degree limit, 60 degree cool down before reset. The high-limit thermostat cuts off power to the dryer if it overheats. If the thermostat has tripped, the dryer will not heat. To determine if the thermostat is defective, use a multimeter to test it for continuity.
Frequently Purchased Together For This Model
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic