Shop replacement repair parts for Carrier Furnace model 58CTW135---10122

Brand Decal - Carrier

Nitride Hot Surface Furnace Ignitor

Limit switch non-resettable 101-200F

Furnace blower wheel. 12" X 11.93" 1/2" Bore. The blower wheel blows air out of the furnace and through the house. The blower wheel is attached to the blower motor shaft with a set screw. If the set screw is loose, the blower wheel will wobble on the motor shaft and be noisy as it turns.

Door switch

Pressure switch, dual

Furnace draft inducer motor. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Heat exchanger kit

Furnace control board. The control board regulates the supply of power to the furnace components. Be sure to check more commonly defective parts before replacing the control board.

Natural gas orifice spud kit, .45, pack of 7. *Should be installed by a certified Carrier repairperson.

Door latch

Unframed filter, 16 X 25 inches

Pressure switch

.44 Orifice. Bag of 7. Natural Gas. *Should be installed by a certified Carrier repairperson.

Gas valve, **Note: This valve is 7/8" longer than the original OEM gas valve. A black metal nipple and/or coupling may be needed.