Shop replacement repair parts for Carrier Furnace model 58STA135---14122

Brand Decal - Carrier

Nitride Hot Surface Furnace Ignitor

Limit switch non-resettable 101-200F

Furnace draft inducer motor kit. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Furnace blower wheel. 12" X 11.93" 1/2" Bore. The blower wheel blows air out of the furnace and through the house. The blower wheel is attached to the blower motor shaft with a set screw. If the set screw is loose, the blower wheel will wobble on the motor shaft and be noisy as it turns.

Carrier furnace control board, The control board regulates the supply of power to the furnace components. Be sure to check more commonly defective parts before replacing the control board.

Door switch

24v gas valve 1/2" npt, 3.5" wc., ef32cw210

Furnace blower motor:
Horsepower: 3/4
Voltage: 115
Full-Load Amperage: 11
Hertz: 60
RPM: 1075
Speeds: 3
Rotation: Counterclockwise
Frame: 48
Enclosure: Open
Shaft Length: 4"

Pressure switch, dual

Furnace draft inducer motor. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Heat exchanger kit

Natural gas orifice spud kit, .45, pack of 7. *Should be installed by a certified Carrier repairperson.

Door latch

Unframed filter, 16 X 25 inches