Shop replacement repair parts for Carrier Furnace model 58STA110---16122

Brand Decal - Carrier

Nitride Hot Surface Furnace Ignitor

Limit switch non-resettable 101-200F

Furnace draft inducer motor kit. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Limit switch 125-165F

Furnace blower wheel. 12" X 11.93" 1/2" Bore. The blower wheel blows air out of the furnace and through the house. The blower wheel is attached to the blower motor shaft with a set screw. If the set screw is loose, the blower wheel will wobble on the motor shaft and be noisy as it turns.

Main Control Board HK42FZ061. Genuine manufacturer's replacement part for furnaces and air handlers. It's crucial for their repair and proper functioning, ensuring the systems operate smoothly and efficiently. The board is compatible with a range of Carrier, Bryant, and Payne models.

Door switch

24v gas valve 1/2" npt, 3.5" wc., ef32cw210

Furnace blower motor:
Horsepower: 3/4
Voltage: 115
Full-Load Amperage: 11
Hertz: 60
RPM: 1075
Speeds: 3
Rotation: Counterclockwise
Frame: 48
Enclosure: Open
Shaft Length: 4"

Furnace draft inducer motor. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Heat exchanger kit

Natural gas orifice spud kit, .45, pack of 7. *Should be installed by a certified Carrier repairperson.

Door latch

Unframed filter, 16 X 25 inches