Kenmore Washing Machine 11022102311 Parts

Drive Clutch (Splutch) Kit. This kit has 6 parts; a spring, housing, cam ring, basket drive gear, pulley, and nut. The pulley is driven by the belt and the splutch works with the mode shift actuator to drive the washplate and spin the inner basket. A worn splutch can cause spin or washplate problems

Washer main drive belt. This belt is located under the washing machine and is used to drive the splutch pulley. It goes around the motor & splutch pulleys. Worn or broken drive belt can cause spin or washplate problems.

Affresh® Washing machine cleaner. This cleaner removes and prevents odor-causing residue in all brands of washers. To use, add one tablet to washer with no clothes and select hot water.
- Septic safe
- More effective than bleach.
- Three tablets per package.

White Touch Up Paint

Suspension Ball Kit
Please use your model number to order complete suspension rod kit that will include the suspension rods and balls

Transmission assembly with shaft, seal & bearing

Package of two 5-foot-long Industrial Braid hoses with pre-installed washers and straight ends. It is recommended to replace washing machine inlet hoses after 5 years of use to reduce the risk of hose failure.

White washer lid strike assembly. The strike is what the lid lock hooks onto to lock the washing machine lid. If the washing machine is not advancing into the cycle or is displaying a lid lock fault this may be the cause of the issue.

Residential Washer Hoses- Fits most major washer brands. • Provides hot & cold water to the washer • (2) 4 Ft. hoses for hot & cold water • (4) Hose washers • Anti-leak crimp
It is recommended to replace washing machine inlet hoses after 5 years of use to reduce the risk of hose failure.

Washer fill hose gasket and screen set of four

Washer drain hose extension kit. Used to extend washing machine drain hose approximately 4 feet. *Also, order the required adapter to connect the extension to the existing drain hose.

Washing machine drain hose extension connector kit

Package of two 6-foot-long Industrial Braid hoses with pre-installed washers and 90' ends. It is recommended to replace washing machine inlet hoses after 5 years of use to reduce the risk of hose failure.

Two 5 foot long rubber washing machine fill hoses with washers. It is recommended to replace washing machine inlet hoses after 5 years of use to reduce the risk of hose failure.

Drip tray. Fits under washing machine and prevents floor damage. Protects floor from scuffs, spills and overflows. Includes optional drain adapter. 29 1/4" x 31 1/4" outside dimensions. 27" x 29" is the usable size. The unit curves up after those dimensions. Approximately 1.5 inches deep