Keep your Kenmore 110.20722990 washing machine running reliably with genuine OEM replacement parts from Repair Clinic. The 110.20722990 is a top-load washing machine from Kenmore’s 110 series, built on the Whirlpool platform. The drive belt, lid switch, water inlet valve, and drain pump are the most frequently serviced components on the 110.20722990. Repair Clinic stocks genuine Kenmore OEM parts for the 110.20722990 including the Kenmore washer drive belt parts, Kenmore washer lid switch parts, Kenmore washer water inlet valve parts, and Kenmore washer pump parts. Browse the Kenmore washing machine parts catalog filtered by 110.20722990 for the complete parts inventory.
Kenmore 110.20722990: Whirlpool-Platform Top-Load Washer Service
The Kenmore 110.20722990 is built on the Whirlpool top-load washer platform. The 110 prefix on all Kenmore washing machines identifies a Whirlpool-platform unit. Service components for the 110.20722990 are often interchangeable with equivalent Whirlpool top-load washer configurations. The lid switch prevents agitation and spin when the lid is open and is a common cause of a washer that fills but does not run. The washer repair help section covers 110.20722990 lid switch diagnosis, drive belt replacement, and water inlet valve testing.
Most Replaced Parts on the Kenmore 110.20722990
Lid Switch for the Kenmore 110.20722990
The lid switch is a safety device that prevents agitation and spin when the lid is open. A failed lid switch typically causes the washer to fill but not agitate or spin. Test the switch for continuity at both the open and closed lid positions before ordering a replacement.
Drive Belt for the 110.20722990
The drive belt connects the motor to the transmission and pump on the Whirlpool-platform top-load washer. A worn or broken drive belt causes the drum to stop spinning or the pump to stop draining.
Water Inlet Valve for the Kenmore 110.20722990
A valve failed in the closed position causes no water fill. A valve with a cracked diaphragm causes the washer to continue filling slowly when the power is off.
Drain Pump for the 110.20722990
A pump that hums without draining has a jammed pump impeller. Remove the pump and check for a coin, button, or debris caught in the impeller before ordering a replacement pump assembly.
Why Choose Repair Clinic for Kenmore 110.20722990 Parts
- Genuine Kenmore OEM Components: Drive belts, lid switches, and water inlet valves confirmed for the 110.20722990 Whirlpool-platform top-load washer Kenmore washing machine parts.
- 110-Prefix Kenmore and Whirlpool Platform Equivalence: All Kenmore 110-prefix washers are built on the Whirlpool platform. Service components are documented with Whirlpool cross-reference where applicable.
- Top-Load Washer Repair Resources: Lid switch diagnosis, drive belt replacement, and water inlet valve testing through washer repair help.
- 365-Day Returns: Return any uninstalled Kenmore part within a full year of purchase with no restocking fees.
Kenmore 110.20722990 Washer Parts FAQ
What type of washer is the Kenmore 110.20722990?
The Kenmore 110.20722990 is a top-load washing machine from Kenmore’s 110 series, built on the Whirlpool platform. The 110 prefix identifies Whirlpool-platform Kenmore top-load washers. Service components for the 110.20722990 are often interchangeable with equivalent Whirlpool top-load washer configurations.
Why does my Kenmore 110.20722990 not agitate or spin?
A top-load washer that fills with water but does not agitate most commonly has a failed lid switch that prevents the motor from starting when the lid is open or the lid switch has failed. A washer that agitates but does not spin has most commonly failed at the drive belt.
Why does my Kenmore 110.20722990 not fill with water?
No water fill is most commonly caused by a failed water inlet valve that is not opening when energized. Test the valve solenoid coils for continuity before ordering a replacement.
Why is the Kenmore 110.20722990 lid switch important?
The lid switch is a safety device that prevents the washer from agitating or spinning when the lid is open. A failed lid switch prevents the washer from completing any wash or spin cycle regardless of whether the lid is actually open or closed.
