Shop replacement repair parts for Kenmore Dryer model 110.87761801

Dryer thermal fuse. Opens at approximately 196°F (91°C). *If open check for air flow issues like plugged exhaust vent or damaged blower wheel

Dryer high limit thermostat and thermal fuse kit. If the dryer does not heat the most common cause is a blown thermal fuse. Both the thermostat and fuse can be tested to determine if either is defective.352 F fuse. L146.1-44.4c thermostat.

Electric dryer power cord kit, 4 foot 30 Amp 3 wire w/closed eyelets & strain relief

Electric dryer power cord kit, 6 foot 30 Amp 4 wire with closed eyelets and strain relief

Dryer power cord. 4 foot, 30 amps, 4 wire

Panel

Panel

Knob


Control board

Dryer door switch with wire harness and connector. This part has been discontinued by the manufacturer. However, there are service kits available for select models. These service kits include a new door switch, a new front panel, and installation instructions. See related items below.

Control board

Center user interface control.
*Per the manufacturer both the center and right user interface controls must be replaced together. Use part number off the right control to correctly identify the kit