Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairYork Furnace Won't Start? Furnace Repair #S1-33103010000
York Furnace Won't Start? Furnace Repair #S1-33103010000
Skill Level
Total Parts Cost
$172.89Estimated Savings
$112.5001:55
- Description
This video provides step-by-step repair instructions for replacing the control board on a York furnace. The most common reasons for replacing the control board are when the furnace doesn’t heat, start or runs only for a few minutes, the blower doesn’t run, or the blower runs all the time.
All of the information for this furnace control board replacement video is applicable to the following brands:
York, Luxaire, Fraser-Johnson, Coleman
All of the information for this furnace control board replacement video is applicable to the following brands:
York, Luxaire, Fraser-Johnson, Coleman
Step By Step Instructions
1
To replace the control board on your furnace first turn off the power to the furnace.
2
Next, rotate the knobs securing the blower chamber panel and pull the panel off.
3
Now use small pliers to squeeze the tabs on the mounting pins to release the old control board from the mounting plate.
4
You’re now ready to install the new control board.
5
Hold the old board out of the way as you position the new board on the mounting plate and snap the mounting pins into place.
6
Now transfer all of the wires from the old control board to the new one.
7
Be aware you may need to remove some terminal covers on the new board to connect all of the wires.
8
Reposition the blower chamber panel and rotate the knobs to secure.
9
You’re now ready to restore power to the furnace and confirm that it’s functioning properly.
Description
This video provides step-by-step repair instructions for replacing the control board on a York furnace. The most common reasons for replacing the control board are when the furnace doesn’t heat, start or runs only for a few minutes, the blower doesn’t run, or the blower runs all the time.
All of the information for this furnace control board replacement video is applicable to the following brands:
York, Luxaire, Fraser-Johnson, Coleman
All of the information for this furnace control board replacement video is applicable to the following brands:
York, Luxaire, Fraser-Johnson, Coleman
Step-By-Step Instructions
1
To replace the control board on your furnace first turn off the power to the furnace.
2
Next, rotate the knobs securing the blower chamber panel and pull the panel off.
3
Now use small pliers to squeeze the tabs on the mounting pins to release the old control board from the mounting plate.
4
You’re now ready to install the new control board.
5
Hold the old board out of the way as you position the new board on the mounting plate and snap the mounting pins into place.
6
Now transfer all of the wires from the old control board to the new one.
7
Be aware you may need to remove some terminal covers on the new board to connect all of the wires.
8
Reposition the blower chamber panel and rotate the knobs to secure.
9
You’re now ready to restore power to the furnace and confirm that it’s functioning properly.
Applicable Product Model
Parts Needed
Control Board
$172.89
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com