Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairYork Furnace Isn't Heating? Replace Flame Sensor #S1-02537499000
York Furnace Isn't Heating? Replace Flame Sensor #S1-02537499000
Skill Level
Total Parts Cost
$71.91Estimated Savings
$112.5001:23
- Description
This video provides step-by-step repair instructions for replacing the flame sensor on a York furnace. The most common reasons for replacing the flame sensor are when the furnace doesn’t heat or runs only for a few minutes.
All of the information for this flame sensor replacement video is applicable to the following brands:
York, Luxaire, Fraser-Johnson, Coleman
All of the information for this flame sensor replacement video is applicable to the following brands:
York, Luxaire, Fraser-Johnson, Coleman
Step By Step Instructions
1
To replace the flame sensor on your furnace first shut off the power to the furnace.
2
Next, rotate the knobs securing the combustion chamber panel and pull the panel off.
3
Now disconnect the wire from the old flame sensor.
4
Remove the mounting screw and pull the old sensor out.
5
Install the new flame sensor by inserting it into the burner housing.
6
Secure it with the mounting screw and connect the wire to the new sensor.
7
Reposition the combustion chamber panel and rotate the knobs to secure.
8
You’re now ready to restore power to the furnace and confirm that it’s functioning properly.
Description
This video provides step-by-step repair instructions for replacing the flame sensor on a York furnace. The most common reasons for replacing the flame sensor are when the furnace doesn’t heat or runs only for a few minutes.
All of the information for this flame sensor replacement video is applicable to the following brands:
York, Luxaire, Fraser-Johnson, Coleman
All of the information for this flame sensor replacement video is applicable to the following brands:
York, Luxaire, Fraser-Johnson, Coleman
Step-By-Step Instructions
1
To replace the flame sensor on your furnace first shut off the power to the furnace.
2
Next, rotate the knobs securing the combustion chamber panel and pull the panel off.
3
Now disconnect the wire from the old flame sensor.
4
Remove the mounting screw and pull the old sensor out.
5
Install the new flame sensor by inserting it into the burner housing.
6
Secure it with the mounting screw and connect the wire to the new sensor.
7
Reposition the combustion chamber panel and rotate the knobs to secure.
8
You’re now ready to restore power to the furnace and confirm that it’s functioning properly.
Applicable Product Model
Parts Needed
Flame Sensor
$71.91
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com