Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairYork Furnace Starts/Stops? Pressure Switch #S1-02435785000
York Furnace Starts/Stops? Pressure Switch #S1-02435785000
Skill Level
Total Parts Cost
$70.97Estimated Savings
$112.5001:30
- Description
Furnace starts then stops? This video provides step-by-step instructions for replacing the pressure switch (or vacuum switch) on York furnaces. The most common reasons for replacing this switch are if the furnace isn't heating or only runs for a few minutes.
All of the information in this pressure switch replacement video is applicable to the following brands: York
All of the information in this pressure switch replacement video is applicable to the following brands: York
Step By Step Instructions
1
To replace the pressure switch on your furnace first shut off the power to the furnace.
2
Next, rotate the knobs securing the combustion chamber panel and pull the panel off.
3
Now disconnect the pressure switch wires.
4
Detach the vacuum tube.
5
Remove the mounting screws to release the old pressure switch.
6
Install the new pressure switch by positioning it on the draft inducer motor then replace the mounting screws to secure.
7
Attach the vacuum tube and connect the wires.
8
Reposition the combustion chamber panel and rotate the knobs to secure.
9
You’re now ready to restore power to the furnace and confirm that it’s functioning properly.
Description
Furnace starts then stops? This video provides step-by-step instructions for replacing the pressure switch (or vacuum switch) on York furnaces. The most common reasons for replacing this switch are if the furnace isn't heating or only runs for a few minutes.
All of the information in this pressure switch replacement video is applicable to the following brands: York
All of the information in this pressure switch replacement video is applicable to the following brands: York
Step-By-Step Instructions
1
To replace the pressure switch on your furnace first shut off the power to the furnace.
2
Next, rotate the knobs securing the combustion chamber panel and pull the panel off.
3
Now disconnect the pressure switch wires.
4
Detach the vacuum tube.
5
Remove the mounting screws to release the old pressure switch.
6
Install the new pressure switch by positioning it on the draft inducer motor then replace the mounting screws to secure.
7
Attach the vacuum tube and connect the wires.
8
Reposition the combustion chamber panel and rotate the knobs to secure.
9
You’re now ready to restore power to the furnace and confirm that it’s functioning properly.
Applicable Product Model
Parts Needed
Pressure Switch
$70.97
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com