Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool/Kenmore Gas Dryer Replace Access Panel Clip #297092
Whirlpool/Kenmore Gas Dryer Replace Access Panel Clip #297092
Skill Level
Total Parts Cost
$12.80Estimated Savings
$112.5001:02
- Description
This video provides step-by-step repair instructions for replacing the access panel clip (spring clip) on a Whirlpool/Kenmore 27-inch gas dryer. The most common reason for replacing the access panel clip is when it is broken or damaged.
All of the information for this access panel clip replacement video is applicable to the following brands:
Kenmore, Whirlpool, KitchenAid, Roper, Maytag, Estate, Admiral
Tools needed: flat head screwdriver
All of the information for this access panel clip replacement video is applicable to the following brands:
Kenmore, Whirlpool, KitchenAid, Roper, Maytag, Estate, Admiral
Tools needed: flat head screwdriver
Step By Step Instructions
1
As with any repair, be sure you’ve unplugged the appliance before beginning.
2
Your first step is to remove the lower access panel.
3
Use a flathead screwdriver to release the spring clips and remove the panel.
4
If still intact, remove the old access panel clip.
5
Install the new clip by snapping it onto the base frame of the dryer.
6
Align the slots in the lower access panel with the panel clips and snap the panel into position.
7
You’re now ready to plug the appliance back in.
Description
This video provides step-by-step repair instructions for replacing the access panel clip (spring clip) on a Whirlpool/Kenmore 27-inch gas dryer. The most common reason for replacing the access panel clip is when it is broken or damaged.
All of the information for this access panel clip replacement video is applicable to the following brands:
Kenmore, Whirlpool, KitchenAid, Roper, Maytag, Estate, Admiral
Tools needed: flat head screwdriver
All of the information for this access panel clip replacement video is applicable to the following brands:
Kenmore, Whirlpool, KitchenAid, Roper, Maytag, Estate, Admiral
Tools needed: flat head screwdriver
Step-By-Step Instructions
1
As with any repair, be sure you’ve unplugged the appliance before beginning.
2
Your first step is to remove the lower access panel.
3
Use a flathead screwdriver to release the spring clips and remove the panel.
4
If still intact, remove the old access panel clip.
5
Install the new clip by snapping it onto the base frame of the dryer.
6
Align the slots in the lower access panel with the panel clips and snap the panel into position.
7
You’re now ready to plug the appliance back in.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com