Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool/Kenmore Dryer Temperature Selector Switch #3399643
Whirlpool/Kenmore Dryer Temperature Selector Switch #3399643
Skill Level
Total Parts Cost
$90.42Estimated Savings
$112.5001:36
- Description
This video provides step-by-step repair instructions for replacing the temperature selector switch on a Whirlpool/Kenmore gas dryer. The most common reason for replacing the temperature selector switch is when the temperature selector is not changing the temperature of the drying cycles.
All of the information for this temperature selector switch replacement video is applicable to the following brands:
Kenmore, Whirlpool
Tools needed: flat head screwdriver, putty knife
All of the information for this temperature selector switch replacement video is applicable to the following brands:
Kenmore, Whirlpool
Tools needed: flat head screwdriver, putty knife
Step By Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to remove the temperature selection knob. This may require some effort - You can use string or wire to help pry it off.
3
Next, you’ll need to detach the control panel.
4
Depending on your model, you will either insert a putty knife under the panel to release the two clips or you will pull off both plastic end caps and remove the screws found underneath.
5
Now, rotate the control panel up.
6
Pull the tab and rotate the old switch to remove.
7
Squeeze the tabs to release the wire connector.
8
You’re now ready to install the new temperature selection switch.
9
Reattach the wire connector then insert the switch into the control panel and rotate until it snaps into position.
10
Rotate the control panel back down, and snap it into place.
11
If applicable, replace the screws and end caps.
12
Reinstall the temperature selection knob and plug the appliance back in to make sure it’s functioning properly.
Description
This video provides step-by-step repair instructions for replacing the temperature selector switch on a Whirlpool/Kenmore gas dryer. The most common reason for replacing the temperature selector switch is when the temperature selector is not changing the temperature of the drying cycles.
All of the information for this temperature selector switch replacement video is applicable to the following brands:
Kenmore, Whirlpool
Tools needed: flat head screwdriver, putty knife
All of the information for this temperature selector switch replacement video is applicable to the following brands:
Kenmore, Whirlpool
Tools needed: flat head screwdriver, putty knife
Step-By-Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to remove the temperature selection knob. This may require some effort - You can use string or wire to help pry it off.
3
Next, you’ll need to detach the control panel.
4
Depending on your model, you will either insert a putty knife under the panel to release the two clips or you will pull off both plastic end caps and remove the screws found underneath.
5
Now, rotate the control panel up.
6
Pull the tab and rotate the old switch to remove.
7
Squeeze the tabs to release the wire connector.
8
You’re now ready to install the new temperature selection switch.
9
Reattach the wire connector then insert the switch into the control panel and rotate until it snaps into position.
10
Rotate the control panel back down, and snap it into place.
11
If applicable, replace the screws and end caps.
12
Reinstall the temperature selection knob and plug the appliance back in to make sure it’s functioning properly.
Applicable Product Model
Parts Needed
Selector Switch
$90.42
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com