Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKohler Lawn Mower Ignition Coil Replacement #14 584 16-S
Kohler Lawn Mower Ignition Coil Replacement #14 584 16-S
Skill Level
Total Parts Cost
$56.93Estimated Savings
$112.5003:26
- Description
This video provides step-by-step repair instructions for replacing the ignition coil on a Kohler small engine. The most common reason for replacing the ignition coil is when the small engine won’t start.
Click here to purchase part #14 584 16-S:
www.repairclinic.com/PartDetail/Ignition-Coil/1458416S/2886465?TLSID=1876
All of the information for this ignition coil replacement video is applicable to the following brands:
Kohler
Tools needed: ratchet and socket, needle-nose pliers, combo wrench
Click here to purchase part #14 584 16-S:
www.repairclinic.com/PartDetail/Ignition-Coil/1458416S/2886465?TLSID=1876
All of the information for this ignition coil replacement video is applicable to the following brands:
Kohler
Tools needed: ratchet and socket, needle-nose pliers, combo wrench
Step By Step Instructions
1
Before you replace the ignition coil first make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
Release the starter rope and handle from the rope guide.
4
Now remove the nuts securing the recoil starter to the engine
5
Pull the starter off and lift off the engine cover.
6
Now pull off the spacer from the mounting post.
7
Disconnect the wire from the ignition coil and rotate the flywheel to move the magnets out of the way.
8
Use a 10mm wrench to loosen the mounting post then unthread the post.
9
Now remove the mounting bolt to release the ignition coil and pull the old coil free.
10
You’re now ready to install the new ignition coil.
11
Slide the spark plug boot under the auto-choke position the new coil and thread the mounting post and bolt to secure the coil loosely
12
Confirm that the magnets are rotated out of the way, then pull the coil back and tighten the post and bolt.
13
Now, rotate the flywheel so the magnets align with the coil.
14
Insert a business card and loosen the bolt and post to align the coil the correct distance from the flywheel.
15
Re-tighten the post and bolt and remove the business card.
16
Connect the wire to the new coil.
17
Slide the spacer onto the mounting post.
18
Replace the engine cover.
19
Reinstall the recoil starter by aligning it on the mounting posts then thread the nuts on to secure.
20
Hook the rope and handle onto the rope guide.
21
You’re now ready to attach the new wire and boot to the spark plug and confirm that the engine runs properly.
Description
This video provides step-by-step repair instructions for replacing the ignition coil on a Kohler small engine. The most common reason for replacing the ignition coil is when the small engine won’t start.
Click here to purchase part #14 584 16-S:
www.repairclinic.com/PartDetail/Ignition-Coil/1458416S/2886465?TLSID=1876
All of the information for this ignition coil replacement video is applicable to the following brands:
Kohler
Tools needed: ratchet and socket, needle-nose pliers, combo wrench
Click here to purchase part #14 584 16-S:
www.repairclinic.com/PartDetail/Ignition-Coil/1458416S/2886465?TLSID=1876
All of the information for this ignition coil replacement video is applicable to the following brands:
Kohler
Tools needed: ratchet and socket, needle-nose pliers, combo wrench
Step-By-Step Instructions
1
Before you replace the ignition coil first make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
Release the starter rope and handle from the rope guide.
4
Now remove the nuts securing the recoil starter to the engine
5
Pull the starter off and lift off the engine cover.
6
Now pull off the spacer from the mounting post.
7
Disconnect the wire from the ignition coil and rotate the flywheel to move the magnets out of the way.
8
Use a 10mm wrench to loosen the mounting post then unthread the post.
9
Now remove the mounting bolt to release the ignition coil and pull the old coil free.
10
You’re now ready to install the new ignition coil.
11
Slide the spark plug boot under the auto-choke position the new coil and thread the mounting post and bolt to secure the coil loosely
12
Confirm that the magnets are rotated out of the way, then pull the coil back and tighten the post and bolt.
13
Now, rotate the flywheel so the magnets align with the coil.
14
Insert a business card and loosen the bolt and post to align the coil the correct distance from the flywheel.
15
Re-tighten the post and bolt and remove the business card.
16
Connect the wire to the new coil.
17
Slide the spacer onto the mounting post.
18
Replace the engine cover.
19
Reinstall the recoil starter by aligning it on the mounting posts then thread the nuts on to secure.
20
Hook the rope and handle onto the rope guide.
21
You’re now ready to attach the new wire and boot to the spark plug and confirm that the engine runs properly.
Applicable Product Model
Parts Needed
Ignition Coil
$56.93
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com