Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairPressure Washer Won't Start? Honda Small Engine #16100-Z0L-864
Pressure Washer Won't Start? Honda Small Engine #16100-Z0L-864
Skill Level
Total Parts Cost
$26.77Estimated Savings
$112.5003:28
- Description
This video provides step-by-step instructions for replacing the carburetor assembly on Honda small engines. The most common reason for replacing the carburetor is when it is clogged, causing the engine to run poorly or not start at all, and cleaning the carburetor does not fix the problem.
All of the information in this carburetor assembly replacement video is applicable to the following brands: Honda
Tools used: 10mm socket and socket wrench, pliers, needle-nose pliers
All of the information in this carburetor assembly replacement video is applicable to the following brands: Honda
Tools used: 10mm socket and socket wrench, pliers, needle-nose pliers
Step By Step Instructions
1
Before you replace the carburetor first make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug and turn the fuel valve to the “off” position.
3
Release the tabs to remove the air filter cover and pull out the filter.
4
Next, remove the mounting bolts securing the air filter housing, the carburetor, the gaskets and spacer.
5
Pull off the breather tube and set the air filter housing aside.
6
Release the retaining clamp and pull the fuel line off of the carburetor.
7
Be prepared for some fuel to spill.
8
Detach the governor return spring then tip the old carburetor to release it from both the choke rod and the governor rod.
9
Install the new carburetor by inserting the choke rod into the choke lever and the governor rod into the throttle lever.
10
Attach the governor return spring.
11
Attach the fuel line to the new carburetor and secure it with the retaining clamp.
12
Now reinsert the mounting bolts into the air filter housing and align the gaskets, spacer and the new carburetor on the bolts.
13
Reattach the breather tube ..then thread the bolts into the cylinder head and tighten.
14
Replace the air filter in the housing then insert the cover tabs into the slots in the housing and snap the cover into place.
15
Turn the fuel valve to the “on” position.
16
You’re now ready to reattach the wire and boot to the spark plug and confirm that the engine runs properly.
Description
This video provides step-by-step instructions for replacing the carburetor assembly on Honda small engines. The most common reason for replacing the carburetor is when it is clogged, causing the engine to run poorly or not start at all, and cleaning the carburetor does not fix the problem.
All of the information in this carburetor assembly replacement video is applicable to the following brands: Honda
Tools used: 10mm socket and socket wrench, pliers, needle-nose pliers
All of the information in this carburetor assembly replacement video is applicable to the following brands: Honda
Tools used: 10mm socket and socket wrench, pliers, needle-nose pliers
Step-By-Step Instructions
1
Before you replace the carburetor first make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug and turn the fuel valve to the “off” position.
3
Release the tabs to remove the air filter cover and pull out the filter.
4
Next, remove the mounting bolts securing the air filter housing, the carburetor, the gaskets and spacer.
5
Pull off the breather tube and set the air filter housing aside.
6
Release the retaining clamp and pull the fuel line off of the carburetor.
7
Be prepared for some fuel to spill.
8
Detach the governor return spring then tip the old carburetor to release it from both the choke rod and the governor rod.
9
Install the new carburetor by inserting the choke rod into the choke lever and the governor rod into the throttle lever.
10
Attach the governor return spring.
11
Attach the fuel line to the new carburetor and secure it with the retaining clamp.
12
Now reinsert the mounting bolts into the air filter housing and align the gaskets, spacer and the new carburetor on the bolts.
13
Reattach the breather tube ..then thread the bolts into the cylinder head and tighten.
14
Replace the air filter in the housing then insert the cover tabs into the slots in the housing and snap the cover into place.
15
Turn the fuel valve to the “on” position.
16
You’re now ready to reattach the wire and boot to the spark plug and confirm that the engine runs properly.
Applicable Product Model
Parts Needed
Carburetor
$26.77
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com