Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Gas Range Oven Replace Control Board Overlay #WB27K10256
GE Gas Range Oven Replace Control Board Overlay #WB27K10256
Skill Level
Total Parts Cost
$222.40Estimated Savings
$112.5002:58
- Description
This video provides step-by-step repair instructions for replacing the control board overlay on a GE gas range. The most common reasons for replacing the control board overlay are when the overlay is wearing away or when replacing the oven control board.
All of the information for this control board overlay replacement video is applicable to the following brands:
GE
Tools needed: multi screwdriver, ratchet wrench, 1/2" socket
All of the information for this control board overlay replacement video is applicable to the following brands:
GE
Tools needed: multi screwdriver, ratchet wrench, 1/2" socket
Step By Step Instructions
1
As with any appliance repair, you should unplug the power cord before beginning.
2
To replace the oven control board overlay in your range first remove the screws on the front bottom of the control panel and loosen the screws on the back of the panel.
3
Now pull the bottom of the panel outward and lift the panel up to release.
4
Note the orientation of the wires attached to the control board then disconnect them from the board.
5
Next, remove the mounting screws securing the control board.
6
Lift the control board out of the panel.
7
Peel off the old overlay and remove any residue from the board.
8
Install the new control board overlay by peeling off the backing to expose the adhesive.
9
Now carefully align the overlay on the board and press it into place.
10
Once in place, you can peel off the protective plastic layer.
11
Reposition the board in the control panel and replace the screws to secure.
12
Reconnect the wires to the appropriate terminals on the board.
13
Align the screws on the top of the control panel with the slots in the support and push the panel into position.
14
Tighten the screws in the back and replace the screws on the front bottom of the panel.
15
You’re now ready to plug the power cord back in and confirm that the range is working properly.
Description
This video provides step-by-step repair instructions for replacing the control board overlay on a GE gas range. The most common reasons for replacing the control board overlay are when the overlay is wearing away or when replacing the oven control board.
All of the information for this control board overlay replacement video is applicable to the following brands:
GE
Tools needed: multi screwdriver, ratchet wrench, 1/2" socket
All of the information for this control board overlay replacement video is applicable to the following brands:
GE
Tools needed: multi screwdriver, ratchet wrench, 1/2" socket
Step-By-Step Instructions
1
As with any appliance repair, you should unplug the power cord before beginning.
2
To replace the oven control board overlay in your range first remove the screws on the front bottom of the control panel and loosen the screws on the back of the panel.
3
Now pull the bottom of the panel outward and lift the panel up to release.
4
Note the orientation of the wires attached to the control board then disconnect them from the board.
5
Next, remove the mounting screws securing the control board.
6
Lift the control board out of the panel.
7
Peel off the old overlay and remove any residue from the board.
8
Install the new control board overlay by peeling off the backing to expose the adhesive.
9
Now carefully align the overlay on the board and press it into place.
10
Once in place, you can peel off the protective plastic layer.
11
Reposition the board in the control panel and replace the screws to secure.
12
Reconnect the wires to the appropriate terminals on the board.
13
Align the screws on the top of the control panel with the slots in the support and push the panel into position.
14
Tighten the screws in the back and replace the screws on the front bottom of the panel.
15
You’re now ready to plug the power cord back in and confirm that the range is working properly.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com