Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool/Kenmore 27" Gas Dryer Timer Replacement #8299771
Whirlpool/Kenmore 27" Gas Dryer Timer Replacement #8299771
Skill Level
Total Parts Cost
$170.76Estimated Savings
$112.5001:41
- Description
This video provides step-by-step repair instructions for replacing the timer on a Whirlpool/Kenmore 27-inch gas dryer. The most common reasons for replacing the timer are when the dryer doesn’t heat or won’t start.
All of the information for this dryer timer replacement video is applicable to the following brands:
Kenmore, Whirlpool, Maytag
Tools needed: hex socket, flat head screwdriver, putty knife
All of the information for this dryer timer replacement video is applicable to the following brands:
Kenmore, Whirlpool, Maytag
Tools needed: hex socket, flat head screwdriver, putty knife
Step By Step Instructions
1
As with any repair, be sure you’ve unplugged the appliance before beginning.
2
Your first step is to remove the timer knob. This may require some effort -
3
You can use string or wire to help pry it off.
4
Next, detach the control panel. Depending on your model, you will either insert a putty knife under the panel to release the two clips or you will pull off both plastic end caps and remove the screws found underneath.
5
Now, rotate the control panel up.
6
Remove the screws attached to the back of timer to release it.
7
Prepare the new timer assembly by transferring the wires from the old part to the new one.
8
Use the rear mounting screws to secure the timer to the control panel.
9
Rotate the control panel back down, and snap it into place.
10
If applicable, replace the screws and end caps.
11
Reinstall the timer knob.
12
Now, plug the appliance back in to make sure it’s functioning properly.
Description
This video provides step-by-step repair instructions for replacing the timer on a Whirlpool/Kenmore 27-inch gas dryer. The most common reasons for replacing the timer are when the dryer doesn’t heat or won’t start.
All of the information for this dryer timer replacement video is applicable to the following brands:
Kenmore, Whirlpool, Maytag
Tools needed: hex socket, flat head screwdriver, putty knife
All of the information for this dryer timer replacement video is applicable to the following brands:
Kenmore, Whirlpool, Maytag
Tools needed: hex socket, flat head screwdriver, putty knife
Step-By-Step Instructions
1
As with any repair, be sure you’ve unplugged the appliance before beginning.
2
Your first step is to remove the timer knob. This may require some effort -
3
You can use string or wire to help pry it off.
4
Next, detach the control panel. Depending on your model, you will either insert a putty knife under the panel to release the two clips or you will pull off both plastic end caps and remove the screws found underneath.
5
Now, rotate the control panel up.
6
Remove the screws attached to the back of timer to release it.
7
Prepare the new timer assembly by transferring the wires from the old part to the new one.
8
Use the rear mounting screws to secure the timer to the control panel.
9
Rotate the control panel back down, and snap it into place.
10
If applicable, replace the screws and end caps.
11
Reinstall the timer knob.
12
Now, plug the appliance back in to make sure it’s functioning properly.
Applicable Product Model
Parts Needed
Timer
$170.76
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com