Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Gas Range/Oven Door Hinge Replacement #WB10K12
GE Gas Range/Oven Door Hinge Replacement #WB10K12
Skill Level
Total Parts Cost
$48.89Estimated Savings
$112.5003:02
- Description
This video provides step-by-step repair instructions for replacing the door hinge on a GE gas range/stove/oven. The most common reason for replacing the hinge is when the oven door is hard to open or close.
All of the information for this oven door hinge replacement video is applicable to the following brands:
GE, Hotpoint, Kenmore, RCA, Americana
Tools needed: multi-screwdriver, flathead screwdriver
All of the information for this oven door hinge replacement video is applicable to the following brands:
GE, Hotpoint, Kenmore, RCA, Americana
Tools needed: multi-screwdriver, flathead screwdriver
Step By Step Instructions
1
To replace an oven door hinge on your range open the oven door to the broil position then lift it off of the hinges.
2
Next, slide out the broiler drawer and set it aside.
3
Now remove the screw securing the side cover
4
Pull the cover off and return the hinge to the upright position.
5
Note the orientation of the door spring and the adjustment bar.
6
Unhook the bar from the frame and remove it from the spring.
7
Note the position of the spring in the hinge and disconnect it.
8
Next, use a small flathead screwdriver to remove the e-clip.
9
Pull out the mounting pin and remove the old hinge.
10
Install the new oven door hinge by first applying some grease to the spring mounting hole.
11
Now insert the hinge into the frame and align it on the hinge support.
12
Replace the mounting pin and secure it with the e-clip.
13
Insert the small end of the spring into the appropriate hole in the hinge.
14
Insert the opposite end into the appropriate hole in the adjustment bar then hook the bar into the same hole in the frame as before.
15
Reposition the side cover and reinstall the screw to secure.
16
Replace the broiler drawer by aligning the rails on the drawer with the tracks on the base and sliding the drawer into position.
17
Return the hinges to the broil position then replace the oven door by aligning it on the hinges and sliding it into position.
18
Confirm that the door opens and closes properly.
Description
This video provides step-by-step repair instructions for replacing the door hinge on a GE gas range/stove/oven. The most common reason for replacing the hinge is when the oven door is hard to open or close.
All of the information for this oven door hinge replacement video is applicable to the following brands:
GE, Hotpoint, Kenmore, RCA, Americana
Tools needed: multi-screwdriver, flathead screwdriver
All of the information for this oven door hinge replacement video is applicable to the following brands:
GE, Hotpoint, Kenmore, RCA, Americana
Tools needed: multi-screwdriver, flathead screwdriver
Step-By-Step Instructions
1
To replace an oven door hinge on your range open the oven door to the broil position then lift it off of the hinges.
2
Next, slide out the broiler drawer and set it aside.
3
Now remove the screw securing the side cover
4
Pull the cover off and return the hinge to the upright position.
5
Note the orientation of the door spring and the adjustment bar.
6
Unhook the bar from the frame and remove it from the spring.
7
Note the position of the spring in the hinge and disconnect it.
8
Next, use a small flathead screwdriver to remove the e-clip.
9
Pull out the mounting pin and remove the old hinge.
10
Install the new oven door hinge by first applying some grease to the spring mounting hole.
11
Now insert the hinge into the frame and align it on the hinge support.
12
Replace the mounting pin and secure it with the e-clip.
13
Insert the small end of the spring into the appropriate hole in the hinge.
14
Insert the opposite end into the appropriate hole in the adjustment bar then hook the bar into the same hole in the frame as before.
15
Reposition the side cover and reinstall the screw to secure.
16
Replace the broiler drawer by aligning the rails on the drawer with the tracks on the base and sliding the drawer into position.
17
Return the hinges to the broil position then replace the oven door by aligning it on the hinges and sliding it into position.
18
Confirm that the door opens and closes properly.
Applicable Product Model
Recommended Tools and Accessories
Cooktop Cleaner
$29.50
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com