Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Gas Range/Oven Broiler Drawer Handle Replacement WB15K10008
GE Gas Range/Oven Broiler Drawer Handle Replacement WB15K10008
Skill Level
Total Parts Cost
$30.00Estimated Savings
$112.5002:27
- Description
This video provides step-by-step repair instructions for replacing the broiler drawer handle on a GE gas range/stove/oven. The most common reasons for replacing the drawer handle are when it is broken or missing.
All of the information for this broiler drawer handle replacement video is applicable to the following brands:
GE, Hotpoint, Kenmore, RCA, Americana
Tools needed: multi-screwdriver with T10 Torx
All of the information for this broiler drawer handle replacement video is applicable to the following brands:
GE, Hotpoint, Kenmore, RCA, Americana
Tools needed: multi-screwdriver with T10 Torx
Step By Step Instructions
1
To replace the broiler drawer handle on your range first slide out the broiler drawer and set it on a sturdy surface.
2
Next, remove the screws on the bottom of the front panel securing the panel to the drawer.
3
Now loosen the screws on the back leaving the spacer on each screw.
4
You can now pull the front panel off.
5
Now remove the two center screws to release the old broiler drawer handle.
6
Prepare the new broiler drawer handle for installation by transferring the spacers from the old handle to the new one.
7
Now align the new handle on the front panel and replace the two center screws to secure.
8
Realign the front panel.
9
Secure the panel by tightening the screws in the back and replacing the screws on the bottom.
10
Replace the broiler drawer by aligning the drawer rails with the tracks on the base then slide the drawer into position.
Description
This video provides step-by-step repair instructions for replacing the broiler drawer handle on a GE gas range/stove/oven. The most common reasons for replacing the drawer handle are when it is broken or missing.
All of the information for this broiler drawer handle replacement video is applicable to the following brands:
GE, Hotpoint, Kenmore, RCA, Americana
Tools needed: multi-screwdriver with T10 Torx
All of the information for this broiler drawer handle replacement video is applicable to the following brands:
GE, Hotpoint, Kenmore, RCA, Americana
Tools needed: multi-screwdriver with T10 Torx
Step-By-Step Instructions
1
To replace the broiler drawer handle on your range first slide out the broiler drawer and set it on a sturdy surface.
2
Next, remove the screws on the bottom of the front panel securing the panel to the drawer.
3
Now loosen the screws on the back leaving the spacer on each screw.
4
You can now pull the front panel off.
5
Now remove the two center screws to release the old broiler drawer handle.
6
Prepare the new broiler drawer handle for installation by transferring the spacers from the old handle to the new one.
7
Now align the new handle on the front panel and replace the two center screws to secure.
8
Realign the front panel.
9
Secure the panel by tightening the screws in the back and replacing the screws on the bottom.
10
Replace the broiler drawer by aligning the drawer rails with the tracks on the base then slide the drawer into position.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com