Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Gas Oven Door Handle Replacement #WB15K10096
GE Gas Oven Door Handle Replacement #WB15K10096
Skill Level
Total Parts Cost
$60.46Estimated Savings
$112.5004:08
- Description
This video provides step-by-step repair instructions for replacing the oven door handle on a GE gas range/stove/oven. The most common reason for replacing the door handle is when it is broken.
All of the information for this oven door handle replacement video is applicable to the following brands:
GE, Hotpoint, RCA, Americana
Tools needed: multi-screwdriver with T10 Torx
All of the information for this oven door handle replacement video is applicable to the following brands:
GE, Hotpoint, RCA, Americana
Tools needed: multi-screwdriver with T10 Torx
Step By Step Instructions
1
To replace the oven door handle in your range open the oven door to the broil position then lift it off of the hinges.
2
Remove the screws to release the door barrier from the bottom of the door.
3
Next, remove the screws to release the lower trim.
4
Now slide the door glass out.
5
Next, remove the screws on the side of the outer door panel and loosen the screws on the inner panel.
6
Use a putty knife to help lift the inner door panel out.
7
You can now remove the screws securing the handle and remove the old handle.
8
Install the new oven door handle by aligning it on the outer door panel then replace the screws to secure.
9
Replace the inner door panel.
10
Make sure the spacers are positioned on the inner panel screws then thread and tighten the screws.
11
Reinstall the screws on the sides of the outer door panel.
12
With the rough side of the oven door glass facing inward and the curved portion of the window closest to the door handle insert the glass into the channel in the upper trim.
13
Replace the lower door trim by aligning the door glass in the channel and pushing the trim into position.
14
Replace the screws to secure.
15
Realign the door barrier and replace the screws to secure.
16
Make sure the door hinges are still in the broil position then replace the oven door by aligning it on the hinges and sliding it into position.
Description
This video provides step-by-step repair instructions for replacing the oven door handle on a GE gas range/stove/oven. The most common reason for replacing the door handle is when it is broken.
All of the information for this oven door handle replacement video is applicable to the following brands:
GE, Hotpoint, RCA, Americana
Tools needed: multi-screwdriver with T10 Torx
All of the information for this oven door handle replacement video is applicable to the following brands:
GE, Hotpoint, RCA, Americana
Tools needed: multi-screwdriver with T10 Torx
Step-By-Step Instructions
1
To replace the oven door handle in your range open the oven door to the broil position then lift it off of the hinges.
2
Remove the screws to release the door barrier from the bottom of the door.
3
Next, remove the screws to release the lower trim.
4
Now slide the door glass out.
5
Next, remove the screws on the side of the outer door panel and loosen the screws on the inner panel.
6
Use a putty knife to help lift the inner door panel out.
7
You can now remove the screws securing the handle and remove the old handle.
8
Install the new oven door handle by aligning it on the outer door panel then replace the screws to secure.
9
Replace the inner door panel.
10
Make sure the spacers are positioned on the inner panel screws then thread and tighten the screws.
11
Reinstall the screws on the sides of the outer door panel.
12
With the rough side of the oven door glass facing inward and the curved portion of the window closest to the door handle insert the glass into the channel in the upper trim.
13
Replace the lower door trim by aligning the door glass in the channel and pushing the trim into position.
14
Replace the screws to secure.
15
Realign the door barrier and replace the screws to secure.
16
Make sure the door hinges are still in the broil position then replace the oven door by aligning it on the hinges and sliding it into position.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com