Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairSamsung Dryer Main Control Board Replacement #DC92-00322U
Samsung Dryer Main Control Board Replacement #DC92-00322U
Skill Level
Total Parts Cost
$332.04Estimated Savings
$112.5002:50
- Description
This video provides step-by-step instructions for replacing the main control board on Samsung dryers. The most common reason for replacing the main control board is if the dryer doesn’t heat or won’t start, but the buttons and switches on the control panel seem to work properly and other more commonly defective parts have been checked first.
All of the information in this control board replacement video is applicable to the following brands: Samsung
Tools used: multi-screwdriver, Phillips head bit
All of the information in this control board replacement video is applicable to the following brands: Samsung
Tools used: multi-screwdriver, Phillips head bit
Step By Step Instructions
1
As with any repair, be sure to unplug the appliance before beginning.
2
To replace the main control board in your dryer, first remove the screws at the back securing the top panel.
3
Now slide the panel back and lift it off.
4
Next, remove the screws securing the control board housing.
5
Pull the housing away from the cabinet and release the wire harness from both retainers.
6
Note the location of the wires on the control board and disconnect them.
7
Unthread the mounting screw then lift out the old board.
8
Install the new control board by inserting the tab into the slot in the housing.
9
Secure it with the mounting screw.
10
Connect the wires to the appropriate terminals on the new board.
11
Secure the wire harness in the retainers.
12
Reposition the control board housing on the side of the cabinet and replace the screws to secure.
13
Reposition the top panel by aligning the edge of the panel with the tabs on the support bracket then push forward.
14
Replace the screws in the back.
15
Plug the power cord back in and your dryer should be ready for use.
Description
This video provides step-by-step instructions for replacing the main control board on Samsung dryers. The most common reason for replacing the main control board is if the dryer doesn’t heat or won’t start, but the buttons and switches on the control panel seem to work properly and other more commonly defective parts have been checked first.
All of the information in this control board replacement video is applicable to the following brands: Samsung
Tools used: multi-screwdriver, Phillips head bit
All of the information in this control board replacement video is applicable to the following brands: Samsung
Tools used: multi-screwdriver, Phillips head bit
Step-By-Step Instructions
1
As with any repair, be sure to unplug the appliance before beginning.
2
To replace the main control board in your dryer, first remove the screws at the back securing the top panel.
3
Now slide the panel back and lift it off.
4
Next, remove the screws securing the control board housing.
5
Pull the housing away from the cabinet and release the wire harness from both retainers.
6
Note the location of the wires on the control board and disconnect them.
7
Unthread the mounting screw then lift out the old board.
8
Install the new control board by inserting the tab into the slot in the housing.
9
Secure it with the mounting screw.
10
Connect the wires to the appropriate terminals on the new board.
11
Secure the wire harness in the retainers.
12
Reposition the control board housing on the side of the cabinet and replace the screws to secure.
13
Reposition the top panel by aligning the edge of the panel with the tabs on the support bracket then push forward.
14
Replace the screws in the back.
15
Plug the power cord back in and your dryer should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com