Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Washer Drive Belt Replacement #134051000
Frigidaire Washer Drive Belt Replacement #134051000
Skill Level
Total Parts Cost
$31.85Estimated Savings
$112.5002:25
- Description
This video provides step-by-step instructions for replacing the drive belt on Frigidaire washing machines. The most common reasons for replacing the drive belt are if it has broken, causing the washer to not spin or agitate, or if a part of it has broken off, causing the washer to make a loud noise whenever the motor is running.
All of the information in this drive belt replacement video is applicable to the following brands: Frigidaire, Kenmore, Crosley, Gibson, Westinghouse, Electrolux
Tools used: multi-screwdriver, Phillips head bit
All of the information in this drive belt replacement video is applicable to the following brands: Frigidaire, Kenmore, Crosley, Gibson, Westinghouse, Electrolux
Tools used: multi-screwdriver, Phillips head bit
Step By Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning
2
Shut off the water supply.
3
To replace the drive belt on your washer, first remove the hot and cold water supply lines from the inlet valve – be prepared for some water to spill out.
4
Next, remove the screws securing the rear panel.
5
Pull the panel off.
6
Now rotate the drive pulley as you pull off the old belt if still intact.
7
Install the new drive belt by looping it onto the motor shaft with the grooves facing inward.
8
Now loop the belt onto the drive pulley as you rotate the pulley to fully align the belt.
9
Realign the rear panel and replace the screws to secure.
10
Reattach the hot and cold water supply lines to the inlet valve.
11
You’re now ready to turn the water supply back on
12
Plug the power cord back in and confirm that the washer works properly.
Description
This video provides step-by-step instructions for replacing the drive belt on Frigidaire washing machines. The most common reasons for replacing the drive belt are if it has broken, causing the washer to not spin or agitate, or if a part of it has broken off, causing the washer to make a loud noise whenever the motor is running.
All of the information in this drive belt replacement video is applicable to the following brands: Frigidaire, Kenmore, Crosley, Gibson, Westinghouse, Electrolux
Tools used: multi-screwdriver, Phillips head bit
All of the information in this drive belt replacement video is applicable to the following brands: Frigidaire, Kenmore, Crosley, Gibson, Westinghouse, Electrolux
Tools used: multi-screwdriver, Phillips head bit
Step-By-Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning
2
Shut off the water supply.
3
To replace the drive belt on your washer, first remove the hot and cold water supply lines from the inlet valve – be prepared for some water to spill out.
4
Next, remove the screws securing the rear panel.
5
Pull the panel off.
6
Now rotate the drive pulley as you pull off the old belt if still intact.
7
Install the new drive belt by looping it onto the motor shaft with the grooves facing inward.
8
Now loop the belt onto the drive pulley as you rotate the pulley to fully align the belt.
9
Realign the rear panel and replace the screws to secure.
10
Reattach the hot and cold water supply lines to the inlet valve.
11
You’re now ready to turn the water supply back on
12
Plug the power cord back in and confirm that the washer works properly.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com