Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Front Load Washer Replace Drain Hose #134592700
Frigidaire Front Load Washer Replace Drain Hose #134592700
Skill Level
Total Parts Cost
$77.94Estimated Savings
$112.5003:38
- Description
This video provides step-by-step instructions for replacing the drain hose on Frigidaire washing machines. The most common reason for replacing the drain hose is if it is clogged or damaged, causing the washer to leak water or be unable to drain.
All of the information in this drain hose replacement video is applicable to the following brands: Frigidaire, Westinghouse, Kenmore, Crosley, Gibson, Universal, Electrolux
Tools used: multi-screwdriver, nut driver, Phillips head bit, wire cutters, pliers
All of the information in this drain hose replacement video is applicable to the following brands: Frigidaire, Westinghouse, Kenmore, Crosley, Gibson, Universal, Electrolux
Tools used: multi-screwdriver, nut driver, Phillips head bit, wire cutters, pliers
Step By Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning…
2
…and shut off the water supply.
3
To replace the drain hose in your washer…
4
…first remove the screws securing the lower front access panel.
5
Pull the panel down and out.
6
Use pliers to release the retaining clamp securing the drain hose to the pump…
7
…and pull the hose off – be prepared for some water to spill out.
8
Now remove the hot and cold water supply lines from the inlet valve – again, be prepared for some water to spill.
9
Next, remove the screws securing the rear panel.
10
Pull the panel off.
11
Now cut the zip tie securing the hose and wires…
12
…and pull the old hose out of the cabinet.
13
Prepare the new drain hose for installation…
14
…by transferring the retaining clamp and stop ring from the old hose to the new one.
15
Now feed the hose through the rear of the cabinet…
16
…and attach the hose to the drain pump.
17
Position the retaining clamp to secure.
18
Feed a zip tie through the retainer in the base and use it to secure the hose to the wires.
19
Realign the rear panel…
20
…and replace the screws to secure.
21
Reattach the hot and cold water supply lines to the inlet valve.
22
Replace the access panel by aligning the holes with the pins on the bottom of the front panel…
23
…then replace the screws.
24
You’re now ready to turn the water supply back on…
25
…plug the power cord back in…
26
…and confirm that the washer works properly.
Description
This video provides step-by-step instructions for replacing the drain hose on Frigidaire washing machines. The most common reason for replacing the drain hose is if it is clogged or damaged, causing the washer to leak water or be unable to drain.
All of the information in this drain hose replacement video is applicable to the following brands: Frigidaire, Westinghouse, Kenmore, Crosley, Gibson, Universal, Electrolux
Tools used: multi-screwdriver, nut driver, Phillips head bit, wire cutters, pliers
All of the information in this drain hose replacement video is applicable to the following brands: Frigidaire, Westinghouse, Kenmore, Crosley, Gibson, Universal, Electrolux
Tools used: multi-screwdriver, nut driver, Phillips head bit, wire cutters, pliers
Step-By-Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning…
2
…and shut off the water supply.
3
To replace the drain hose in your washer…
4
…first remove the screws securing the lower front access panel.
5
Pull the panel down and out.
6
Use pliers to release the retaining clamp securing the drain hose to the pump…
7
…and pull the hose off – be prepared for some water to spill out.
8
Now remove the hot and cold water supply lines from the inlet valve – again, be prepared for some water to spill.
9
Next, remove the screws securing the rear panel.
10
Pull the panel off.
11
Now cut the zip tie securing the hose and wires…
12
…and pull the old hose out of the cabinet.
13
Prepare the new drain hose for installation…
14
…by transferring the retaining clamp and stop ring from the old hose to the new one.
15
Now feed the hose through the rear of the cabinet…
16
…and attach the hose to the drain pump.
17
Position the retaining clamp to secure.
18
Feed a zip tie through the retainer in the base and use it to secure the hose to the wires.
19
Realign the rear panel…
20
…and replace the screws to secure.
21
Reattach the hot and cold water supply lines to the inlet valve.
22
Replace the access panel by aligning the holes with the pins on the bottom of the front panel…
23
…then replace the screws.
24
You’re now ready to turn the water supply back on…
25
…plug the power cord back in…
26
…and confirm that the washer works properly.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com