Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairToro Leaf Blower Won’t Start? Recoil Starter #308430001
Toro Leaf Blower Won’t Start? Recoil Starter #308430001
Skill Level
Total Parts Cost
$22.12Estimated Savings
$112.5001:42
- Description
This video provides step-by-step instructions for replacing the recoil starter on Toro and Ryobi leaf blowers. The most common reason for replacing the recoil starter is if it is broken or stuck, causing the pulley to not release the starter rope, preventing you from starting the engine.
All of the information in this recoil starter replacement video is applicable to following brands: Toro, Ryobi
Tools used: T25 Torx screwdriver
All of the information in this recoil starter replacement video is applicable to following brands: Toro, Ryobi
Tools used: T25 Torx screwdriver
Step By Step Instructions
1
Before you replace the recoil starter on your leaf blower first make sure the engine has cooled.
2
Next, remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
Use a t-25 torx bit screwdriver to unthread the mounting screws securing the recoil starter.
4
Pull the old starter free.
5
Install the new recoil starter by aligning it on the starter housing.
6
Then rethread the mounting screws to secure.
7
Make sure the grounding tab is secured under the lower right mounting screw if applicable.
8
Reattach the wire and boot to the spark plug and your leaf blower should be ready for use.
Description
This video provides step-by-step instructions for replacing the recoil starter on Toro and Ryobi leaf blowers. The most common reason for replacing the recoil starter is if it is broken or stuck, causing the pulley to not release the starter rope, preventing you from starting the engine.
All of the information in this recoil starter replacement video is applicable to following brands: Toro, Ryobi
Tools used: T25 Torx screwdriver
All of the information in this recoil starter replacement video is applicable to following brands: Toro, Ryobi
Tools used: T25 Torx screwdriver
Step-By-Step Instructions
1
Before you replace the recoil starter on your leaf blower first make sure the engine has cooled.
2
Next, remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
Use a t-25 torx bit screwdriver to unthread the mounting screws securing the recoil starter.
4
Pull the old starter free.
5
Install the new recoil starter by aligning it on the starter housing.
6
Then rethread the mounting screws to secure.
7
Make sure the grounding tab is secured under the lower right mounting screw if applicable.
8
Reattach the wire and boot to the spark plug and your leaf blower should be ready for use.
Applicable Product Model
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com