Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairCub Cadet Snowblower Auger Shear Pin Replacement #738-04124A
Cub Cadet Snowblower Auger Shear Pin Replacement #738-04124A
Skill Level
Total Parts Cost
$2.34Estimated Savings
$112.5001:28
- Description
This video provides step-by-step repair instructions for replacing the shear pin on a Cub Cadet snowblower. The most common reasons for replacing the shear pin are when the snowblower auger won’t turn or only one auger turns.
All of the information for this shear pin replacement video is applicable to the following brands:
MTD, Yard Machines, Craftsman, Cub Cadet, Troy-Bilt, Yard-Man, Huskee
Tools used: punch and hammer, needle-nose pliers
All of the information for this shear pin replacement video is applicable to the following brands:
MTD, Yard Machines, Craftsman, Cub Cadet, Troy-Bilt, Yard-Man, Huskee
Tools used: punch and hammer, needle-nose pliers
Step By Step Instructions
1
Before you replace a shear pin on your snowblower first make sure the engine has cooled.
2
Next, remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
We recommend you perform this procedure with little or no fuel in the tank.
4
Carefully tip the snowblower back so it rests on its handles.
5
Rotate the applicable auger blade to align the shaft holes and use a punch and hammer to knock out any remnants of the old broken shear pin.
6
Install the new shear pin by inserting it through the shaft holes and secure it with the retaining clip.
7
Return the snowblower to its upright position.
8
Reattach the spark plug wire and boot refill the fuel tank. and your snowblower should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the shear pin on a Cub Cadet snowblower. The most common reasons for replacing the shear pin are when the snowblower auger won’t turn or only one auger turns.
All of the information for this shear pin replacement video is applicable to the following brands:
MTD, Yard Machines, Craftsman, Cub Cadet, Troy-Bilt, Yard-Man, Huskee
Tools used: punch and hammer, needle-nose pliers
All of the information for this shear pin replacement video is applicable to the following brands:
MTD, Yard Machines, Craftsman, Cub Cadet, Troy-Bilt, Yard-Man, Huskee
Tools used: punch and hammer, needle-nose pliers
Step-By-Step Instructions
1
Before you replace a shear pin on your snowblower first make sure the engine has cooled.
2
Next, remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
We recommend you perform this procedure with little or no fuel in the tank.
4
Carefully tip the snowblower back so it rests on its handles.
5
Rotate the applicable auger blade to align the shaft holes and use a punch and hammer to knock out any remnants of the old broken shear pin.
6
Install the new shear pin by inserting it through the shaft holes and secure it with the retaining clip.
7
Return the snowblower to its upright position.
8
Reattach the spark plug wire and boot refill the fuel tank. and your snowblower should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com