Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairCub Cadet Snowblower Auger Housing Bearing, Rear #941-0309
Cub Cadet Snowblower Auger Housing Bearing, Rear #941-0309
Skill Level
Total Parts Cost
$79.99Estimated Savings
$112.5006:22
- Description
This video provides step-by-step repair instructions for replacing the auger housing rear bearing on a Cub Cadet snowblower. The most common reasons for replacing the auger housing bearing are when the snowblower auger won’t turn or only one auger turns.
All of the information for this auger housing rear bearing replacement video is applicable to the following brands:
MTD, Yard Machines, Cub Cadet, Craftsman, Yard-Man, Huskee, Troy-Bilt, Montgomery Wards, Ryobi, Bolens
Tools used: 3/8 inch socket, ½ inch socket, wood block, pliers, grease pump
All of the information for this auger housing rear bearing replacement video is applicable to the following brands:
MTD, Yard Machines, Cub Cadet, Craftsman, Yard-Man, Huskee, Troy-Bilt, Montgomery Wards, Ryobi, Bolens
Tools used: 3/8 inch socket, ½ inch socket, wood block, pliers, grease pump
Step By Step Instructions
1
Before you replace the auger housing rear bearing in your snowblower first make sure the engine has cooled.
2
Next, remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
We recommend you perform this procedure with little or no fuel in the tank.
4
Use a 3/8th inch socket to remove the bolts securing the belt cover and pull the cover off.
5
Unhook the auger belt from the engine drive pulley.
6
Use the 3/8th inch socket to remove the bolt securing the front roller bracket.
7
Detach the auger drive cable spring from the idler pulley bracket.
8
Now use a half-inch socket to remove the bolts that secure the auger housing to the rest of the snowblower.
9
With the bolts removed, lift off the auger housing and rest the rear portion of the snowblower on its handles.
10
Secure the impeller and you unthread the bolt securing the auger drive pulley.
11
Remove the washer and the pulley.
12
Remove the pulley hub as well.
13
Next, unthread the mounting bolts securing the bearing holders.
14
With the bolts removed, you can pull out the auger assembly.
15
Now remove the locking nuts securing the bearing retainer.
16
Remove the retainer and pull out the old bearing.
17
Install the new auger housing rear bearing by inserting it into the housing.
18
Replace the retainer and secure it with the locking nuts.
19
If necessary, slide the impeller back onto the rear gear box shaft.
20
Reinstall the auger assembly by inserting the rear gear box shaft into the new bearing.
21
Replace the bolts to secure the bearing holders.
22
Position the pulley hub on the shaft.
23
With the belt aligned on the auger pulley, position the pulley on the hub.
24
Slide the washer onto the mounting bolt.
25
Secure the impeller as you thread the bolt and tighten.
26
Before continuing the reassembly, we recommend injecting additional grease into the bearing holders to help prevent wear.
27
Now reposition the auger housing on the rear portion of the snowblower, making sure to align the chute on the chute adapter.
28
Rethread the housing bolts and tighten to secure.
29
Return the snowblower to its upright position.
30
Reattach the auger drive cable spring to the idler pulley bracket.
31
Now realign the front roller bracket on the frame and replace the bolt to secure.
32
Realign the auger belt on the engine drive pulley.
33
Replace the belt cover.
34
Rethread the bolts and tighten to secure.
35
With the repair completed reattach the spark plug wire and boot refill the fuel tank and your snowblower should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the auger housing rear bearing on a Cub Cadet snowblower. The most common reasons for replacing the auger housing bearing are when the snowblower auger won’t turn or only one auger turns.
All of the information for this auger housing rear bearing replacement video is applicable to the following brands:
MTD, Yard Machines, Cub Cadet, Craftsman, Yard-Man, Huskee, Troy-Bilt, Montgomery Wards, Ryobi, Bolens
Tools used: 3/8 inch socket, ½ inch socket, wood block, pliers, grease pump
All of the information for this auger housing rear bearing replacement video is applicable to the following brands:
MTD, Yard Machines, Cub Cadet, Craftsman, Yard-Man, Huskee, Troy-Bilt, Montgomery Wards, Ryobi, Bolens
Tools used: 3/8 inch socket, ½ inch socket, wood block, pliers, grease pump
Step-By-Step Instructions
1
Before you replace the auger housing rear bearing in your snowblower first make sure the engine has cooled.
2
Next, remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
We recommend you perform this procedure with little or no fuel in the tank.
4
Use a 3/8th inch socket to remove the bolts securing the belt cover and pull the cover off.
5
Unhook the auger belt from the engine drive pulley.
6
Use the 3/8th inch socket to remove the bolt securing the front roller bracket.
7
Detach the auger drive cable spring from the idler pulley bracket.
8
Now use a half-inch socket to remove the bolts that secure the auger housing to the rest of the snowblower.
9
With the bolts removed, lift off the auger housing and rest the rear portion of the snowblower on its handles.
10
Secure the impeller and you unthread the bolt securing the auger drive pulley.
11
Remove the washer and the pulley.
12
Remove the pulley hub as well.
13
Next, unthread the mounting bolts securing the bearing holders.
14
With the bolts removed, you can pull out the auger assembly.
15
Now remove the locking nuts securing the bearing retainer.
16
Remove the retainer and pull out the old bearing.
17
Install the new auger housing rear bearing by inserting it into the housing.
18
Replace the retainer and secure it with the locking nuts.
19
If necessary, slide the impeller back onto the rear gear box shaft.
20
Reinstall the auger assembly by inserting the rear gear box shaft into the new bearing.
21
Replace the bolts to secure the bearing holders.
22
Position the pulley hub on the shaft.
23
With the belt aligned on the auger pulley, position the pulley on the hub.
24
Slide the washer onto the mounting bolt.
25
Secure the impeller as you thread the bolt and tighten.
26
Before continuing the reassembly, we recommend injecting additional grease into the bearing holders to help prevent wear.
27
Now reposition the auger housing on the rear portion of the snowblower, making sure to align the chute on the chute adapter.
28
Rethread the housing bolts and tighten to secure.
29
Return the snowblower to its upright position.
30
Reattach the auger drive cable spring to the idler pulley bracket.
31
Now realign the front roller bracket on the frame and replace the bolt to secure.
32
Realign the auger belt on the engine drive pulley.
33
Replace the belt cover.
34
Rethread the bolts and tighten to secure.
35
With the repair completed reattach the spark plug wire and boot refill the fuel tank and your snowblower should be ready for use.
Applicable Product Model
Parts Needed
Bearing
$79.99
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com