Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairCub Cadet Snowblower Replace Scraper Blade #790-00120-4021
Cub Cadet Snowblower Replace Scraper Blade #790-00120-4021
Skill Level
Total Parts Cost
$25.99Estimated Savings
$112.5002:26
- Description
This video provides step-by-step repair instructions for replacing the scraper blade on a Cub Cadet snowblower. The most common reason for replacing the scraper blade is when it is worn-out.
All of the information for this scraper blade replacement video is applicable to the following brands:
MTD, Cub Cadet, Yard Machines, Craftsman, Yard-Man, Huskee
Tools used: ½ inch socket
All of the information for this scraper blade replacement video is applicable to the following brands:
MTD, Cub Cadet, Yard Machines, Craftsman, Yard-Man, Huskee
Tools used: ½ inch socket
Step By Step Instructions
1
Before you replace the scraper blade on your snowblower first make sure the engine has cooled.
2
Next, remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
We recommend you perform this procedure with little or no fuel in the tank.
4
Carefully tip the snowblower back so it rests on its handles.
5
Now use a half-inch socket to unthread the nuts securing the scraper blade mounting bolts.
6
Remove the bolts and pull the old scraper blade free.
7
Install the new scraper blade by aligning it on the auger housing.
8
Insert the mounting bolts.
9
Remember to slide the washers onto the side mounting bolts.
10
Thread and tighten all of the nuts to secure.
11
Confirm that the skid shoes are properly positioned before tightening the side mounting nuts.
12
Return the snowblower to its upright position.
13
Reattach the spark plug wire and boot refill the fuel tank. and your snowblower should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the scraper blade on a Cub Cadet snowblower. The most common reason for replacing the scraper blade is when it is worn-out.
All of the information for this scraper blade replacement video is applicable to the following brands:
MTD, Cub Cadet, Yard Machines, Craftsman, Yard-Man, Huskee
Tools used: ½ inch socket
All of the information for this scraper blade replacement video is applicable to the following brands:
MTD, Cub Cadet, Yard Machines, Craftsman, Yard-Man, Huskee
Tools used: ½ inch socket
Step-By-Step Instructions
1
Before you replace the scraper blade on your snowblower first make sure the engine has cooled.
2
Next, remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
We recommend you perform this procedure with little or no fuel in the tank.
4
Carefully tip the snowblower back so it rests on its handles.
5
Now use a half-inch socket to unthread the nuts securing the scraper blade mounting bolts.
6
Remove the bolts and pull the old scraper blade free.
7
Install the new scraper blade by aligning it on the auger housing.
8
Insert the mounting bolts.
9
Remember to slide the washers onto the side mounting bolts.
10
Thread and tighten all of the nuts to secure.
11
Confirm that the skid shoes are properly positioned before tightening the side mounting nuts.
12
Return the snowblower to its upright position.
13
Reattach the spark plug wire and boot refill the fuel tank. and your snowblower should be ready for use.
Applicable Product Model
Parts Needed
Scraper Blade
$25.99
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com