Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairCub Cadet Snowblower Primer Bulb Replacement #951-11824
Cub Cadet Snowblower Primer Bulb Replacement #951-11824
Skill Level
Total Parts Cost
$11.47Estimated Savings
$112.5001:16
- Description
This video provides step-by-step repair instructions for replacing the primer bulb on a Cub Cadet snowblower. The most common reasons for replacing the primer bulb are when the snowblower engine leaks gas, is hard to start, or won’t start at all.
All of the information for this primer bulb replacement video is applicable to the following brands:
MTD, Yard Machines, Craftsman, Cub Cadet, Troy-Bilt, Yard-Man, Huskee
Tools used: small flathead screwdriver, large flathead screwdriver
All of the information for this primer bulb replacement video is applicable to the following brands:
MTD, Yard Machines, Craftsman, Cub Cadet, Troy-Bilt, Yard-Man, Huskee
Tools used: small flathead screwdriver, large flathead screwdriver
Step By Step Instructions
1
Before you replace the primer bulb on your snowblower first make sure the engine has cooled.
2
Next, remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
Use a small flathead screwdriver to pry out the old primer bulb if still intact.
4
Install the new primer bulb by aligning it on the primer base then use a large flathead screwdriver to carefully tuck the edge of the bulb into place.
5
Reattach the spark plug wire and boot and your snowblower should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the primer bulb on a Cub Cadet snowblower. The most common reasons for replacing the primer bulb are when the snowblower engine leaks gas, is hard to start, or won’t start at all.
All of the information for this primer bulb replacement video is applicable to the following brands:
MTD, Yard Machines, Craftsman, Cub Cadet, Troy-Bilt, Yard-Man, Huskee
Tools used: small flathead screwdriver, large flathead screwdriver
All of the information for this primer bulb replacement video is applicable to the following brands:
MTD, Yard Machines, Craftsman, Cub Cadet, Troy-Bilt, Yard-Man, Huskee
Tools used: small flathead screwdriver, large flathead screwdriver
Step-By-Step Instructions
1
Before you replace the primer bulb on your snowblower first make sure the engine has cooled.
2
Next, remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
Use a small flathead screwdriver to pry out the old primer bulb if still intact.
4
Install the new primer bulb by aligning it on the primer base then use a large flathead screwdriver to carefully tuck the edge of the bulb into place.
5
Reattach the spark plug wire and boot and your snowblower should be ready for use.
Applicable Product Model
Parts Needed
Primer Bulb
$11.47
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com