Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Refrigerator Run Capacitor Replacement #W10350564
Whirlpool Refrigerator Run Capacitor Replacement #W10350564
Skill Level
Total Parts Cost
$62.60Estimated Savings
$112.5002:58
- Description
This video provides step-by-step instructions for replacing the run capacitor on Whirlpool refrigerators. The most common reason for replacing the run capacitor is if it goes bad, which can cause the compressor to not start or not run properly.
All of the information in this capacitor replacement video is applicable to the following brands: Whirlpool, KitchenAid, Inglis
Tools used: wrench, 1/4” socket or nut driver
All of the information in this capacitor replacement video is applicable to the following brands: Whirlpool, KitchenAid, Inglis
Tools used: wrench, 1/4” socket or nut driver
Step By Step Instructions
1
Before you replace the run capacitor in your refrigerator unplug the power cord
2
Shut off the water supply.
3
Use a wrench to help unthread the nut to release the water supply line from the inlet valve – be prepared for some water to spill.
4
Use a quarter-inch socket or nut driver to remove the screws securing the access panel.
5
Pull the panel out and remove the power cord retainer from the panel.
6
Disconnect the inlet valve wire harness and move the panel out of the way.
7
Unhook the retaining wire securing the start relay assembly to the compressor.
8
You can now pull off the old run capacitor from the relay.
9
Install the new run capacitor by positioning it on the start relay.
10
Replace the retaining wire to secure the assembly.
11
Position the access panel and connect the wire harness to the terminals on the inlet valve.
12
Attach the power cord retainer to the panel then fully reposition the panel.
13
Replace the screws to secure it.
14
Remember to secure the two water lines with the retainers.
15
Secure the water supply line to the valve with the nut.
16
With the repair completed turn the water supply back on
17
Plug the power cord back in and you refrigerator should be ready for use.
Description
This video provides step-by-step instructions for replacing the run capacitor on Whirlpool refrigerators. The most common reason for replacing the run capacitor is if it goes bad, which can cause the compressor to not start or not run properly.
All of the information in this capacitor replacement video is applicable to the following brands: Whirlpool, KitchenAid, Inglis
Tools used: wrench, 1/4” socket or nut driver
All of the information in this capacitor replacement video is applicable to the following brands: Whirlpool, KitchenAid, Inglis
Tools used: wrench, 1/4” socket or nut driver
Step-By-Step Instructions
1
Before you replace the run capacitor in your refrigerator unplug the power cord
2
Shut off the water supply.
3
Use a wrench to help unthread the nut to release the water supply line from the inlet valve – be prepared for some water to spill.
4
Use a quarter-inch socket or nut driver to remove the screws securing the access panel.
5
Pull the panel out and remove the power cord retainer from the panel.
6
Disconnect the inlet valve wire harness and move the panel out of the way.
7
Unhook the retaining wire securing the start relay assembly to the compressor.
8
You can now pull off the old run capacitor from the relay.
9
Install the new run capacitor by positioning it on the start relay.
10
Replace the retaining wire to secure the assembly.
11
Position the access panel and connect the wire harness to the terminals on the inlet valve.
12
Attach the power cord retainer to the panel then fully reposition the panel.
13
Replace the screws to secure it.
14
Remember to secure the two water lines with the retainers.
15
Secure the water supply line to the valve with the nut.
16
With the repair completed turn the water supply back on
17
Plug the power cord back in and you refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Run Capacitor
$62.60
Total$0.00
Related Articles & Videos
03:36
Part Replacement
Whirlpool Sidekick Refrigerator Run Capacitor Replacement WPW10350564
02:34
Part Replacement
Whirlpool Barracuda Refrigerator Run Capacitor Replacement WPW10350564
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com