Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Sidekick Refrigerator Run Capacitor Replacement WPW10350564 
Whirlpool Sidekick Refrigerator Run Capacitor Replacement WPW10350564
Skill Level
Total Parts Cost
$62.60Estimated Savings
$112.5003:36
- Description
This video provides step-by-step repair instructions for replacing the run capacitor on a Whirlpool Sidekick refrigerator (Model WSR57R18DM01). The most common reason for replacing this part is if the refrigerator will not start.
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
Step By Step Instructions
1
Whirlpool Sidekick Freezer - WSR57R18DM01
2
Refrigerator Run Capacitor Replacement
3
Tools needed: Phillips-head screwdriver, quarter-inch socket or wrench, quarter-inch socket or a nut driver, small flat-head screwdriver
4
Shock
5
Be sure to unplug the power cord.
6
You will need to pull the refrigerator away from the wall so you can access the rear of the appliance.
7
To do this, use a Phillips-head screwdriver to unthread the screws securing the base grille.
8
Pull the base grille forward to remove.
9
Use a quarter-inch socket or wrench to rotate the brake feet counter-clockwise to raise them.
10
You can now roll the refrigerator away from the wall.
11
Use the quarter-inch socket or a nut driver to unthread the screws to release the rear access panel.
12
Using a small flat-head screwdriver, pry off the retainer securing the start relay and run capacitor cover.
13
Pull off the cover.
14
You can now detach the relay and capacitor from the compressor motor.
15
Disconnect the wire connecter.
16
Detach the old run capacitor.
17
Install the new run capacitor by attaching it to the start relay.
18
Connect the wire connecter.
19
Position the assembly on the compressor motor pins.
20
Replace the cover and secure it with the retainer.
21
Reposition the access panel and rethread the screws.
22
Once the refrigerator has been moved back into place, rotate the brake feet clockwise until both are in contact with the floor.
23
Snap the base grille into place.
24
Rethread the screws to secure the base grille.
25
Plug the power cord back in and your refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the run capacitor on a Whirlpool Sidekick refrigerator (Model WSR57R18DM01). The most common reason for replacing this part is if the refrigerator will not start.
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
Step-By-Step Instructions
1
Whirlpool Sidekick Freezer - WSR57R18DM01
2
Refrigerator Run Capacitor Replacement
3
Tools needed: Phillips-head screwdriver, quarter-inch socket or wrench, quarter-inch socket or a nut driver, small flat-head screwdriver
4
Shock
5
Be sure to unplug the power cord.
6
You will need to pull the refrigerator away from the wall so you can access the rear of the appliance.
7
To do this, use a Phillips-head screwdriver to unthread the screws securing the base grille.
8
Pull the base grille forward to remove.
9
Use a quarter-inch socket or wrench to rotate the brake feet counter-clockwise to raise them.
10
You can now roll the refrigerator away from the wall.
11
Use the quarter-inch socket or a nut driver to unthread the screws to release the rear access panel.
12
Using a small flat-head screwdriver, pry off the retainer securing the start relay and run capacitor cover.
13
Pull off the cover.
14
You can now detach the relay and capacitor from the compressor motor.
15
Disconnect the wire connecter.
16
Detach the old run capacitor.
17
Install the new run capacitor by attaching it to the start relay.
18
Connect the wire connecter.
19
Position the assembly on the compressor motor pins.
20
Replace the cover and secure it with the retainer.
21
Reposition the access panel and rethread the screws.
22
Once the refrigerator has been moved back into place, rotate the brake feet clockwise until both are in contact with the floor.
23
Snap the base grille into place.
24
Rethread the screws to secure the base grille.
25
Plug the power cord back in and your refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Run Capacitor
$62.60
Total$0.00
Related Articles & Videos
02:34
Part Replacement
Whirlpool Barracuda Refrigerator Run Capacitor Replacement WPW10350564
00:54
Part Replacement
Whirlpool Sidekick Refrigerator Base Grille Replacement WPW10534165
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com