DescriptionThis video provides step-by-step instructions for replacing the charcoal filter on Whirlpool microwaves. The most common reason for replacing the charcoal filter is when, after checking it as part of regular maintenance, you notice it has become dirty.
All of the information in this filter replacement video is applicable to the following brands: Whirlpool, Amana, Maytag, Estate, Ikea, KitchenAid, Jenn Air, Roper
Tools used: Phillips head screwdriver
Step-By-Step Instructions1
Before you replace the charcoal filter in your microwave oven, unplug the appliance. unplug the appliance.
2
Use a phillips-head screwdriver to unthread the screws securing the grill.
3
Pull the grill forward from the top to remove.
4
Push the old filter up and pull it forward to remove.
5
Install the new charcoal filter by sliding it under the upper mounting tabs then pull the filter down to secure it under the lower tabs.
6
Realign the grill and snap it into place then rethread the screws to secure.
7
Plug the power cord back in and your microwave should be ready for use.