DescriptionThis video provides step-by-step repair instructions for replacing the charcoal filter on a Whirlpool microwave oven/hood combo (Model #WMH73521CS6). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands:
Whirlpool
Step-By-Step Instructions1
Whirlpool Microwave Oven/Hood Combo - WMH73521CS6
2
Microwave Oven Charcoal Filter Replacement
3
Tools needed: Phillips-head screwdriver, magnetized screwdriver recommended
5
Be sure to unplug the power cord or shut off the power supply.
6
Use a Phillips-head screwdriver to unthread the three screws securing the top grille.
7
Pull the grille down from the top to detach.
8
Lift up the front of the filter you?re replacing and pull forward to remove.
9
Install the new charcoal filter by sliding it in over the tabs then push the front down to snap it into place.
10
Before you reinstall the top grille, make sure the two support clips are in place.
11
Now align the grille tabs with the slots in the frame and snap the grille into position.
12
Rethread the three screws.
13
Having a magnetized screwdriver will make it easier to rethread the screw on the right.
14
Plug the power cord back in or restore the power supply and the microwave oven should be ready for use.