Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Microwave Oven/Hood Combo Control Board Assembly Replacement W10893407 
Whirlpool Microwave Oven/Hood Combo Control Board Assembly Replacement W10893407
Skill Level
Total Parts Cost
$203.72Estimated Savings
$112.5002:58
- Description
This video provides step-by-step repair instructions for replacing the control board assembly on a Whirlpool microwave oven/hood combo (Model #WMH73521CS6). The most common reason for replacing this part is if the microwave will not work at all.
All of the information for this video is applicable to the following brands:
Whirlpool
All of the information for this video is applicable to the following brands:
Whirlpool
Step By Step Instructions
1
Whirlpool Microwave Oven/Hood Combo - WMH73521CS6
2
Microwave Oven Control Board Assembly Replacement
3
Tools needed: Phillips-head screwdriver
4
Shock Hazard
5
Be sure to unplug the power cord or shut off the power supply.
6
Use a Phillips-head screwdriver to unthread the three screws securing the top grille.
7
Pull the grille down from the top to detach.
8
Next, unthread the screw securing the control board cover to the frame.
9
Lift the cover up to detach.
10
Now note the orientation of the wires connected to the control board?then disconnect them.
11
Unthread the screw securing the grounding wire to full release the control board assembly.
12
Install the new control board assembly by connecting the wires to the appropriate terminals.
13
Secure the grounding wire with the screw.
14
Now insert the cover tabs into the slots in the frame and thread the screw to secure.
15
Now align the grille tabs with the slots in the frame and snap the grille into position.
16
Rethread the three screws.
17
Having a magnetized screwdriver will make it easier to rethread the screw on the right.
18
Plug the power cord back in or restore the power supply and the microwave oven should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the control board assembly on a Whirlpool microwave oven/hood combo (Model #WMH73521CS6). The most common reason for replacing this part is if the microwave will not work at all.
All of the information for this video is applicable to the following brands:
Whirlpool
All of the information for this video is applicable to the following brands:
Whirlpool
Step-By-Step Instructions
1
Whirlpool Microwave Oven/Hood Combo - WMH73521CS6
2
Microwave Oven Control Board Assembly Replacement
3
Tools needed: Phillips-head screwdriver
4
Shock Hazard
5
Be sure to unplug the power cord or shut off the power supply.
6
Use a Phillips-head screwdriver to unthread the three screws securing the top grille.
7
Pull the grille down from the top to detach.
8
Next, unthread the screw securing the control board cover to the frame.
9
Lift the cover up to detach.
10
Now note the orientation of the wires connected to the control board?then disconnect them.
11
Unthread the screw securing the grounding wire to full release the control board assembly.
12
Install the new control board assembly by connecting the wires to the appropriate terminals.
13
Secure the grounding wire with the screw.
14
Now insert the cover tabs into the slots in the frame and thread the screw to secure.
15
Now align the grille tabs with the slots in the frame and snap the grille into position.
16
Rethread the three screws.
17
Having a magnetized screwdriver will make it easier to rethread the screw on the right.
18
Plug the power cord back in or restore the power supply and the microwave oven should be ready for use.
Applicable Product Model
Parts Needed
Control Board
$203.72
Total$0.00
Related Articles & Videos
02:13
Part Replacement
Whirlpool Microwave Oven/Hood Combo Air Damper Installation W10843943
04:10
Part Replacement
Whirlpool Microwave Oven/Hood Combo Mounting Plate Replacement W11025649
02:37
Part Replacement
Whirlpool Microwave Oven/Hood Combo Line Fuse Replacement #W10138793
08:32
Part Replacement
Whirlpool Microwave Oven/Hood Combo Outer Door Glass Replacement WPW10478675
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com