Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Microwave Replace Turntable Motor Seal #8184109
Whirlpool Microwave Replace Turntable Motor Seal #8184109
Skill Level
Total Parts Cost
$5.00Estimated Savings
$112.5002:40
- Description
This video provides step-by-step instructions for replacing the turntable motor seal on Whirlpool microwaves. The most common reason for replacing the seal is if it is damaged, or along with the motor.
All of the information in this seal replacement video is applicable to the following brands: Whirlpool, KitchenAid, Kenmore, Amana, Maytag, Ikea, Estate, Jenn Air
Tools used: Phillips head screwdriver, T20 Torx bit screwdriver
All of the information in this seal replacement video is applicable to the following brands: Whirlpool, KitchenAid, Kenmore, Amana, Maytag, Ikea, Estate, Jenn Air
Tools used: Phillips head screwdriver, T20 Torx bit screwdriver
Step By Step Instructions
1
Before you replace the turntable motor seal in your microwave oven first unplug the power cord.
2
Now release the bottom panel by using a phillips-head screwdriver to unthread the mounting screws.
3
Note the orientation of the turntable motor wires then slide off the insulators and depress the locking tabs to disconnect the wires.
4
Use a t-20 torx bit screwdriver to unthread the turntable motor mounting screws.
5
Remove the motor.
6
If still intact, remove the old seal.
7
Install the new turntable motor seal by sliding it onto the motor shaft.
8
Now align the motor shaft in the drive coupling and reposition the motor on the base.
9
Thread the mounting screws to secure.
10
Connect the wires to the appropriate terminals and slide the insulators over the terminals.
11
Lift up the bottom panel and secure it with the screws.
12
With the repair completed, plug the power cord back in and your microwave oven should be ready for use.
Description
This video provides step-by-step instructions for replacing the turntable motor seal on Whirlpool microwaves. The most common reason for replacing the seal is if it is damaged, or along with the motor.
All of the information in this seal replacement video is applicable to the following brands: Whirlpool, KitchenAid, Kenmore, Amana, Maytag, Ikea, Estate, Jenn Air
Tools used: Phillips head screwdriver, T20 Torx bit screwdriver
All of the information in this seal replacement video is applicable to the following brands: Whirlpool, KitchenAid, Kenmore, Amana, Maytag, Ikea, Estate, Jenn Air
Tools used: Phillips head screwdriver, T20 Torx bit screwdriver
Step-By-Step Instructions
1
Before you replace the turntable motor seal in your microwave oven first unplug the power cord.
2
Now release the bottom panel by using a phillips-head screwdriver to unthread the mounting screws.
3
Note the orientation of the turntable motor wires then slide off the insulators and depress the locking tabs to disconnect the wires.
4
Use a t-20 torx bit screwdriver to unthread the turntable motor mounting screws.
5
Remove the motor.
6
If still intact, remove the old seal.
7
Install the new turntable motor seal by sliding it onto the motor shaft.
8
Now align the motor shaft in the drive coupling and reposition the motor on the base.
9
Thread the mounting screws to secure.
10
Connect the wires to the appropriate terminals and slide the insulators over the terminals.
11
Lift up the bottom panel and secure it with the screws.
12
With the repair completed, plug the power cord back in and your microwave oven should be ready for use.
Applicable Product Model
Parts Needed
Seal
$5.00
Total$0.00
Related Articles & Videos
03:26
Part Replacement
Whirlpool Microwave Oven/Hood Combo Turntable Motor Seal Replacement 8184109
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com