Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Microwave Oven/Hood Combo Turntable Motor Seal Replacement 8184109 
Whirlpool Microwave Oven/Hood Combo Turntable Motor Seal Replacement 8184109
Skill Level
Total Parts Cost
$5.00Estimated Savings
$112.5003:26
- Description
This video provides step-by-step repair instructions for replacing the turntable motor seal on a Whirlpool microwave oven/hood combo (Model #WMH73521CS6). The most common reason for replacing this part is if the turntable is not working properly.
All of the information for this video is applicable to the following brands:
Whirlpool
All of the information for this video is applicable to the following brands:
Whirlpool
Step By Step Instructions
1
Whirlpool Microwave Oven/Hood Combo - WMH73521CS6
2
Microwave Oven Turntable Motor Seal Replacement
3
Tools needed: Phillips-head screwdriver, T-20 Torx bit
4
Shock Hazard
5
Be sure to unplug the power cord or shut off the power supply.
6
Your first step is to remove the glass tray and pull the drive coupling straight up to remove.
7
Use a Phillips-head screwdriver to unthread the screws securing the oven?s bottom panel.
8
Open the turntable motor terminal cover and disconnect the wires.
9
Now unhook the wires from the retainer and disconnect the wire connecter to fully lower the bottom panel.
10
You can now use a T-20 Torx bit to unthread the mounting screws securing the motor.
11
Remove the motor and lift off the old seal.
12
Install the new turntable motor seal by sliding it onto the motor shaft.
13
Now realign the motor on the mounting plate and thread the mounting screws.
14
Connect the wire connecter and hook the wires in the retainer.
15
Connect the motor wires to the terminals, then align the terminal cover and snap it closed.
16
Fully reposition the bottom panel and rethread the screws to secure.
17
Realign the drive coupling on the motor shaft then push it into place.
18
Realign the glass tray on the coupling.
19
Plug the power cord back in or restore the power supply and the microwave oven should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the turntable motor seal on a Whirlpool microwave oven/hood combo (Model #WMH73521CS6). The most common reason for replacing this part is if the turntable is not working properly.
All of the information for this video is applicable to the following brands:
Whirlpool
All of the information for this video is applicable to the following brands:
Whirlpool
Step-By-Step Instructions
1
Whirlpool Microwave Oven/Hood Combo - WMH73521CS6
2
Microwave Oven Turntable Motor Seal Replacement
3
Tools needed: Phillips-head screwdriver, T-20 Torx bit
4
Shock Hazard
5
Be sure to unplug the power cord or shut off the power supply.
6
Your first step is to remove the glass tray and pull the drive coupling straight up to remove.
7
Use a Phillips-head screwdriver to unthread the screws securing the oven?s bottom panel.
8
Open the turntable motor terminal cover and disconnect the wires.
9
Now unhook the wires from the retainer and disconnect the wire connecter to fully lower the bottom panel.
10
You can now use a T-20 Torx bit to unthread the mounting screws securing the motor.
11
Remove the motor and lift off the old seal.
12
Install the new turntable motor seal by sliding it onto the motor shaft.
13
Now realign the motor on the mounting plate and thread the mounting screws.
14
Connect the wire connecter and hook the wires in the retainer.
15
Connect the motor wires to the terminals, then align the terminal cover and snap it closed.
16
Fully reposition the bottom panel and rethread the screws to secure.
17
Realign the drive coupling on the motor shaft then push it into place.
18
Realign the glass tray on the coupling.
19
Plug the power cord back in or restore the power supply and the microwave oven should be ready for use.
Applicable Product Model
Parts Needed
Seal
$5.00
Total$0.00
Related Articles & Videos
02:13
Part Replacement
Whirlpool Microwave Oven/Hood Combo Air Damper Installation W10843943
04:10
Part Replacement
Whirlpool Microwave Oven/Hood Combo Mounting Plate Replacement W11025649
02:58
Part Replacement
Whirlpool Microwave Oven/Hood Combo Control Board Assembly Replacement W10893407
02:37
Part Replacement
Whirlpool Microwave Oven/Hood Combo Line Fuse Replacement #W10138793
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com