Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairCraftsman Snowblower Discharge Chute Replacement #931-07753A
Craftsman Snowblower Discharge Chute Replacement #931-07753A
Skill Level
Total Parts Cost
$42.96Estimated Savings
$112.5002:23
- Description
This video provides step-by-step instructions for replacing the discharge chute on Craftsman snowblowers. The most common reason for replacing the discharge chute is if it is cracked or broken.
All of the information in this discharge chute replacement video is applicable to the following brands: MTD, Craftsman, Troy-Bilt, Yard Machines, Cub Cadet, Yard-Man, Huskee
Tools used: 1/2” socket, 5/16” socket
All of the information in this discharge chute replacement video is applicable to the following brands: MTD, Craftsman, Troy-Bilt, Yard Machines, Cub Cadet, Yard-Man, Huskee
Tools used: 1/2” socket, 5/16” socket
Step By Step Instructions
1
Before you install a new chute on your snow blower make sure the ignition key has been removed.
2
Use a half-inch socket to unthread the right-side carriage bolt securing the deflector.
3
Next, unthread the wing nut and remove the left side bolt.
4
Pull off the deflector.
5
Depress the tabs on the inside of the chute to release the handle.
6
Now use a 5/16th inch socket to remove the three mounting screws securing the chute to the chute ring.
7
With the screws unthreaded, you can lift off the old chute.
8
Install the new chute by aligning it on the mounting pins then rethread the mounting screws to secure.
9
Align the handle on the new chute and snap it into place.
10
Align the deflector on the chute.
11
Insert the left-side mounting bolt and thread the wing nut on to secure.
12
Now insert the carriage bolt and tighten the nut.
13
To allow the deflector to move freely, avoid over tightening the nut.
14
With the repair completed reinsert the ignition key and your snow blower should be ready for use.
Description
This video provides step-by-step instructions for replacing the discharge chute on Craftsman snowblowers. The most common reason for replacing the discharge chute is if it is cracked or broken.
All of the information in this discharge chute replacement video is applicable to the following brands: MTD, Craftsman, Troy-Bilt, Yard Machines, Cub Cadet, Yard-Man, Huskee
Tools used: 1/2” socket, 5/16” socket
All of the information in this discharge chute replacement video is applicable to the following brands: MTD, Craftsman, Troy-Bilt, Yard Machines, Cub Cadet, Yard-Man, Huskee
Tools used: 1/2” socket, 5/16” socket
Step-By-Step Instructions
1
Before you install a new chute on your snow blower make sure the ignition key has been removed.
2
Use a half-inch socket to unthread the right-side carriage bolt securing the deflector.
3
Next, unthread the wing nut and remove the left side bolt.
4
Pull off the deflector.
5
Depress the tabs on the inside of the chute to release the handle.
6
Now use a 5/16th inch socket to remove the three mounting screws securing the chute to the chute ring.
7
With the screws unthreaded, you can lift off the old chute.
8
Install the new chute by aligning it on the mounting pins then rethread the mounting screws to secure.
9
Align the handle on the new chute and snap it into place.
10
Align the deflector on the chute.
11
Insert the left-side mounting bolt and thread the wing nut on to secure.
12
Now insert the carriage bolt and tighten the nut.
13
To allow the deflector to move freely, avoid over tightening the nut.
14
With the repair completed reinsert the ignition key and your snow blower should be ready for use.
Applicable Product Model
Parts Needed
Discharge Chute
$42.96
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com