Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairCraftsman Snowblower Idler Pulley Replacement #684-04168
Craftsman Snowblower Idler Pulley Replacement #684-04168
Skill Level
Total Parts Cost
$44.58Estimated Savings
$112.5002:15
- Description
This video provides step-by-step instructions for replacing the idler pulley on Craftsman snowblowers. The most common reasons for replacing the idler pulley are if it makes squeaking noises or seizes up, which can cause the belt to break.
All of the information in this idler pulley replacement video is applicable to the following brands: MTD, Yard Machines, Troy-Bilt, Craftsman, Yard-Man, Huskee, Cub Cadet
Tools used: 1/2” socket, 3/8” socket
All of the information in this idler pulley replacement video is applicable to the following brands: MTD, Yard Machines, Troy-Bilt, Craftsman, Yard-Man, Huskee, Cub Cadet
Tools used: 1/2” socket, 3/8” socket
Step By Step Instructions
1
Before you replace the idler pulley on your snow blower make sure the ignition key has been removed.
2
Use a half-inch socket to unthread the upper mounting bolt securing the belt cover.
3
Now use a 3/8th inch socket to remove the lower mounting bolts.
4
With the bolts unthreaded, pull off the cover.
5
Now use the 3/8th inch socket to remove the bolt securing the idler pulley and remove the old pulley.
6
Prepare the new idler pulley for installation by transferring the bushing from the old pulley to the new one.
7
With the bearing side facing in, position the new pulley then thread the bolt through the bushing and tighten.
8
Now realign the auger drive linkage on the bolt and slide on the push nut to secure the linkage.
9
Reposition the belt cover and replace the bolts to secure.
10
With the repair completed reinsert the ignition key and your snow blower should be ready for use.
Description
This video provides step-by-step instructions for replacing the idler pulley on Craftsman snowblowers. The most common reasons for replacing the idler pulley are if it makes squeaking noises or seizes up, which can cause the belt to break.
All of the information in this idler pulley replacement video is applicable to the following brands: MTD, Yard Machines, Troy-Bilt, Craftsman, Yard-Man, Huskee, Cub Cadet
Tools used: 1/2” socket, 3/8” socket
All of the information in this idler pulley replacement video is applicable to the following brands: MTD, Yard Machines, Troy-Bilt, Craftsman, Yard-Man, Huskee, Cub Cadet
Tools used: 1/2” socket, 3/8” socket
Step-By-Step Instructions
1
Before you replace the idler pulley on your snow blower make sure the ignition key has been removed.
2
Use a half-inch socket to unthread the upper mounting bolt securing the belt cover.
3
Now use a 3/8th inch socket to remove the lower mounting bolts.
4
With the bolts unthreaded, pull off the cover.
5
Now use the 3/8th inch socket to remove the bolt securing the idler pulley and remove the old pulley.
6
Prepare the new idler pulley for installation by transferring the bushing from the old pulley to the new one.
7
With the bearing side facing in, position the new pulley then thread the bolt through the bushing and tighten.
8
Now realign the auger drive linkage on the bolt and slide on the push nut to secure the linkage.
9
Reposition the belt cover and replace the bolts to secure.
10
With the repair completed reinsert the ignition key and your snow blower should be ready for use.
Applicable Product Model
Parts Needed
Idler Pulley
$44.58
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com