Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairCraftsman Snowblower Push Cap Replacement #726-0299
Craftsman Snowblower Push Cap Replacement #726-0299
Skill Level
Total Parts Cost
$10.81Estimated Savings
$112.5001:15
- Description
This video provides step-by-step instructions for replacing a wheel push cap on Craftsman snowblowers. The most common reason for replacing a push cap is if the wheel comes loose.
All of the information in this push cap replacement video is applicable to the following brands: MTD, Yard Machines, Craftsman, Yard-Man, Huskee, Troy-Bilt, Bolens, Cub Cadet, Ryobi
Tools used: pliers, 9/16” socket, mallet
All of the information in this push cap replacement video is applicable to the following brands: MTD, Yard Machines, Craftsman, Yard-Man, Huskee, Troy-Bilt, Bolens, Cub Cadet, Ryobi
Tools used: pliers, 9/16” socket, mallet
Step By Step Instructions
1
Before you replace a push cap on your snow blower make sure the ignition key has been removed.
2
Now carefully tip the snow blower forward so it rests on the auger housing.
3
Use pliers to pry off the old push cap if still intact.
4
Install the new push cap by aligning it on the auger axle then position a 9/16th inch socket and strike it with a mallet to secure the cap.
5
Return the snow blower to its upright position.
6
With the repair completed reinsert the ignition key and your snow blower should be ready for use.
Description
This video provides step-by-step instructions for replacing a wheel push cap on Craftsman snowblowers. The most common reason for replacing a push cap is if the wheel comes loose.
All of the information in this push cap replacement video is applicable to the following brands: MTD, Yard Machines, Craftsman, Yard-Man, Huskee, Troy-Bilt, Bolens, Cub Cadet, Ryobi
Tools used: pliers, 9/16” socket, mallet
All of the information in this push cap replacement video is applicable to the following brands: MTD, Yard Machines, Craftsman, Yard-Man, Huskee, Troy-Bilt, Bolens, Cub Cadet, Ryobi
Tools used: pliers, 9/16” socket, mallet
Step-By-Step Instructions
1
Before you replace a push cap on your snow blower make sure the ignition key has been removed.
2
Now carefully tip the snow blower forward so it rests on the auger housing.
3
Use pliers to pry off the old push cap if still intact.
4
Install the new push cap by aligning it on the auger axle then position a 9/16th inch socket and strike it with a mallet to secure the cap.
5
Return the snow blower to its upright position.
6
With the repair completed reinsert the ignition key and your snow blower should be ready for use.
Applicable Product Model
Parts Needed
Push Cap
$10.81
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com