Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairCraftsman Snowblower Bail Arm Replacement #747-05327C-0637
Craftsman Snowblower Bail Arm Replacement #747-05327C-0637
Skill Level
Total Parts Cost
$20.38Estimated Savings
$112.5000:55
- Description
This video provides step-by-step instructions for replacing the bail arm on Craftsman snowblowers. The most common reason for replacing the bail arm is if it is bent or broken, causing the augers to not engage.
All of the information in this bail arm replacement video is applicable to the following brands: MTD, Craftsman, Yard Machines, Yard-Man, Cub Cadet, Troy-Bilt, Huskee
Tools used: none
All of the information in this bail arm replacement video is applicable to the following brands: MTD, Craftsman, Yard Machines, Yard-Man, Cub Cadet, Troy-Bilt, Huskee
Tools used: none
Step By Step Instructions
1
Before you install a new bail arm on your snow blower make sure the ignition key has been removed.
2
Unhook the auger drive cable from the arm.
3
Now squeeze the old bail arm to remove it from the handle.
4
Install the new bail arm by inserting it into the handle then attach the auger drive cable.
5
With the repair completed reinsert the ignition key and your snow blower should be ready for use.
Description
This video provides step-by-step instructions for replacing the bail arm on Craftsman snowblowers. The most common reason for replacing the bail arm is if it is bent or broken, causing the augers to not engage.
All of the information in this bail arm replacement video is applicable to the following brands: MTD, Craftsman, Yard Machines, Yard-Man, Cub Cadet, Troy-Bilt, Huskee
Tools used: none
All of the information in this bail arm replacement video is applicable to the following brands: MTD, Craftsman, Yard Machines, Yard-Man, Cub Cadet, Troy-Bilt, Huskee
Tools used: none
Step-By-Step Instructions
1
Before you install a new bail arm on your snow blower make sure the ignition key has been removed.
2
Unhook the auger drive cable from the arm.
3
Now squeeze the old bail arm to remove it from the handle.
4
Install the new bail arm by inserting it into the handle then attach the auger drive cable.
5
With the repair completed reinsert the ignition key and your snow blower should be ready for use.
Applicable Product Model
Parts Needed
Bail Control Arm
$20.38
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com