Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairCraftsman Snowblower Auger Pulley Replacement #756-04443
Craftsman Snowblower Auger Pulley Replacement #756-04443
Skill Level
Total Parts Cost
$26.74Estimated Savings
$112.5002:22
- Description
This video provides step-by-step instructions for replacing the auger pulley on Craftsman snowblowers. The most common reasons for replacing the auger pulley are if the auger is not spinning, is spinning slowly, or is spinning loudly.
All of the information in this auger pulley replacement video is applicable to the following brands: MTD, Craftsman, Troy-Bilt, Cub Cadet, Yard Machines, Yard-Man, Huskee
Tools used: 1/2” socket, 3/8” socket, pliers, 7/8” socket
All of the information in this auger pulley replacement video is applicable to the following brands: MTD, Craftsman, Troy-Bilt, Cub Cadet, Yard Machines, Yard-Man, Huskee
Tools used: 1/2” socket, 3/8” socket, pliers, 7/8” socket
Step By Step Instructions
1
Before you replace the auger pulley on your snow blower make sure the ignition key has been removed.
2
Use a half-inch socket to unthread the upper mounting bolt securing the belt cover.
3
Now use a 3/8th inch socket to remove the lower mounting bolts.
4
With the bolts unthreaded, pull off the cover.
5
Use pliers to secure the auger shaft and a 7/8th inch socket to unthread the nut securing the auger pulley.
6
Push the idler pulley down to release the brake and pull off the old auger pulley.
7
Install the new auger pulley by first aligning the belt.
8
Now loop the belt onto the drive pulley as you position the new auger pulley on the hub.
9
Make sure the belt rides underneath the idler pulley then rethread the nut to secure the new auger pulley.
10
Reposition the belt cover and replace the bolts to secure.
11
With the repair completed reinsert the ignition key and your snow blower should be ready for use.
Description
This video provides step-by-step instructions for replacing the auger pulley on Craftsman snowblowers. The most common reasons for replacing the auger pulley are if the auger is not spinning, is spinning slowly, or is spinning loudly.
All of the information in this auger pulley replacement video is applicable to the following brands: MTD, Craftsman, Troy-Bilt, Cub Cadet, Yard Machines, Yard-Man, Huskee
Tools used: 1/2” socket, 3/8” socket, pliers, 7/8” socket
All of the information in this auger pulley replacement video is applicable to the following brands: MTD, Craftsman, Troy-Bilt, Cub Cadet, Yard Machines, Yard-Man, Huskee
Tools used: 1/2” socket, 3/8” socket, pliers, 7/8” socket
Step-By-Step Instructions
1
Before you replace the auger pulley on your snow blower make sure the ignition key has been removed.
2
Use a half-inch socket to unthread the upper mounting bolt securing the belt cover.
3
Now use a 3/8th inch socket to remove the lower mounting bolts.
4
With the bolts unthreaded, pull off the cover.
5
Use pliers to secure the auger shaft and a 7/8th inch socket to unthread the nut securing the auger pulley.
6
Push the idler pulley down to release the brake and pull off the old auger pulley.
7
Install the new auger pulley by first aligning the belt.
8
Now loop the belt onto the drive pulley as you position the new auger pulley on the hub.
9
Make sure the belt rides underneath the idler pulley then rethread the nut to secure the new auger pulley.
10
Reposition the belt cover and replace the bolts to secure.
11
With the repair completed reinsert the ignition key and your snow blower should be ready for use.
Applicable Product Model
Parts Needed
Pulley
$26.74
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com