Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairSamsung Dishwasher Vent Actuator #DD6600057A
Samsung Dishwasher Vent Actuator #DD6600057A
Skill Level
Total Parts Cost
$127.51Estimated Savings
$112.5003:02
- Description
This video provides step-by-step repair instructions for replacing the vent actuator on a Samsung dishwasher. The most common reason for replacing the vent actuator is the dishes not drying properly.
All of the information for this vent actuator replacement video is applicable to the following brands:
Samsung
Tools needed: T-20 Torx bit screwdriver, Phillips head screwdriver, needle nose pliers
All of the information for this vent actuator replacement video is applicable to the following brands:
Samsung
Tools needed: T-20 Torx bit screwdriver, Phillips head screwdriver, needle nose pliers
Step By Step Instructions
1
Before you replace the vent actuator in your dishwasher be sure to turn off the power to the appliance.
2
Use a t-20 torx bit screwdriver to remove the screws securing the inner door panel to the outer panel.
3
Avoid fully removing the door latch mounting screws.
4
Carefully separate the two door panels.
5
Use a phillips-head screwdriver to unthread the screw to release the vent cover.
6
Use needle-nose pliers to rotate the grill counter-clockwise to remove.
7
Next, disconnect the vent actuator wire harness.
8
Use a short phillips-head screwdriver to remove the actuator mounting screws.
9
Pull the old actuator out.
10
You’re now ready to install the new vent actuator.
11
Align the diaphragm then insert the actuator plunger firmly into the diaphragm.
12
Replace the screws to secure the actuator to the duct.
13
Connect the wire harness.
14
Replace the grill and rotate clockwise to secure.
15
Realign the vent cover and secure it with the screw.
16
Join the inner and outer door panels together.
17
Tighten the door latch mounting screws.
18
Replace the remainder of the screws to secure the two panels.
19
With the repair completed turn the power supply back on and your dishwasher should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the vent actuator on a Samsung dishwasher. The most common reason for replacing the vent actuator is the dishes not drying properly.
All of the information for this vent actuator replacement video is applicable to the following brands:
Samsung
Tools needed: T-20 Torx bit screwdriver, Phillips head screwdriver, needle nose pliers
All of the information for this vent actuator replacement video is applicable to the following brands:
Samsung
Tools needed: T-20 Torx bit screwdriver, Phillips head screwdriver, needle nose pliers
Step-By-Step Instructions
1
Before you replace the vent actuator in your dishwasher be sure to turn off the power to the appliance.
2
Use a t-20 torx bit screwdriver to remove the screws securing the inner door panel to the outer panel.
3
Avoid fully removing the door latch mounting screws.
4
Carefully separate the two door panels.
5
Use a phillips-head screwdriver to unthread the screw to release the vent cover.
6
Use needle-nose pliers to rotate the grill counter-clockwise to remove.
7
Next, disconnect the vent actuator wire harness.
8
Use a short phillips-head screwdriver to remove the actuator mounting screws.
9
Pull the old actuator out.
10
You’re now ready to install the new vent actuator.
11
Align the diaphragm then insert the actuator plunger firmly into the diaphragm.
12
Replace the screws to secure the actuator to the duct.
13
Connect the wire harness.
14
Replace the grill and rotate clockwise to secure.
15
Realign the vent cover and secure it with the screw.
16
Join the inner and outer door panels together.
17
Tighten the door latch mounting screws.
18
Replace the remainder of the screws to secure the two panels.
19
With the repair completed turn the power supply back on and your dishwasher should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com