Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairSamsung Dishwasher Check Valve Replacement #DD6600045A
Samsung Dishwasher Check Valve Replacement #DD6600045A
Skill Level
Total Parts Cost
$31.19Estimated Savings
$112.5003:07
- Description
This video provides step-by-step repair instructions for replacing the check valve on a Samsung dishwasher. The most common reason for replacing the check valve is if it gets stuck closed, preventing the dishwasher from draining.
All of the information for this check valve replacement video is applicable to the following brands:
Samsung
Tools needed: pliers
All of the information for this check valve replacement video is applicable to the following brands:
Samsung
Tools needed: pliers
Step By Step Instructions
1
Before you replace the check valve in your dishwasher, be sure to turn off the power to the appliance.
2
Slide out the upper dish rack.
3
Note where the dish rack is positioned on the rails, then lift up the rack to remove it.
4
Now slide out the lower dish rack.
5
Next, detach the water supply tube assembly from the mounting brackets on the top and rear of the tub.
6
Now rotate the water supply tube to release it from the pump assembly.
7
Pull the wash arm up to detach.
8
Use a Phillips head screwdriver to unthread all of the screws securing the pump cover.
9
Lift off the cover.
10
Use a small flat-head screwdriver to help pry out the check valve tab.
11
Release the tab from the notch to fully remove the old valve.
12
When installing the new check valve, make sure the beveled side is facing inward as you insert the valve into the hole and align the tab in the slot.
13
Reposition the pump cover and replace all of the screws.
14
Replace the lower wash arm.
15
Reinsert the bottom of the water supply tube into the pump assembly, then rotate to secure.
16
Snap the tube into the mounting brackets on the rear and top of the tub.
17
Replace the lower dish rack.
18
Correctly reposition the upper rack on the rails and slide it into place.
19
With the repair completed, turn the power supply back on and your dishwasher should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the check valve on a Samsung dishwasher. The most common reason for replacing the check valve is if it gets stuck closed, preventing the dishwasher from draining.
All of the information for this check valve replacement video is applicable to the following brands:
Samsung
Tools needed: pliers
All of the information for this check valve replacement video is applicable to the following brands:
Samsung
Tools needed: pliers
Step-By-Step Instructions
1
Before you replace the check valve in your dishwasher, be sure to turn off the power to the appliance.
2
Slide out the upper dish rack.
3
Note where the dish rack is positioned on the rails, then lift up the rack to remove it.
4
Now slide out the lower dish rack.
5
Next, detach the water supply tube assembly from the mounting brackets on the top and rear of the tub.
6
Now rotate the water supply tube to release it from the pump assembly.
7
Pull the wash arm up to detach.
8
Use a Phillips head screwdriver to unthread all of the screws securing the pump cover.
9
Lift off the cover.
10
Use a small flat-head screwdriver to help pry out the check valve tab.
11
Release the tab from the notch to fully remove the old valve.
12
When installing the new check valve, make sure the beveled side is facing inward as you insert the valve into the hole and align the tab in the slot.
13
Reposition the pump cover and replace all of the screws.
14
Replace the lower wash arm.
15
Reinsert the bottom of the water supply tube into the pump assembly, then rotate to secure.
16
Snap the tube into the mounting brackets on the rear and top of the tub.
17
Replace the lower dish rack.
18
Correctly reposition the upper rack on the rails and slide it into place.
19
With the repair completed, turn the power supply back on and your dishwasher should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com