Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairSamsung Dishwasher Center Spray Arm Assembly #DD8201064A
Samsung Dishwasher Center Spray Arm Assembly #DD8201064A
Skill Level
Total Parts Cost
$182.73Estimated Savings
$112.5001:01
- Description
This video provides step-by-step repair instructions for replacing the center spray arm assembly on a Samsung dishwasher. The most common reason for replacing the spray arm if the dishes are not being cleaned properly.
All of the information for this center spray arm assembly video is applicable to the following brands:
Samsung
Tools needed: none
All of the information for this center spray arm assembly video is applicable to the following brands:
Samsung
Tools needed: none
Step By Step Instructions
1
To replace the center wash arm assembly in your dishwasher slide out the upper dish rack note where the dish rack is positioned on the rails then lift up the rack to remove it.
2
Release the upper mounting tab to detach the old center wash arm assembly if still intact.
3
Install the new center wash arm assembly by aligning both the lower and upper mounting tabs on the rack then snap the assembly into place.
4
Correctly reposition the upper rack on the rails and slide it into position.
Description
This video provides step-by-step repair instructions for replacing the center spray arm assembly on a Samsung dishwasher. The most common reason for replacing the spray arm if the dishes are not being cleaned properly.
All of the information for this center spray arm assembly video is applicable to the following brands:
Samsung
Tools needed: none
All of the information for this center spray arm assembly video is applicable to the following brands:
Samsung
Tools needed: none
Step-By-Step Instructions
1
To replace the center wash arm assembly in your dishwasher slide out the upper dish rack note where the dish rack is positioned on the rails then lift up the rack to remove it.
2
Release the upper mounting tab to detach the old center wash arm assembly if still intact.
3
Install the new center wash arm assembly by aligning both the lower and upper mounting tabs on the rack then snap the assembly into place.
4
Correctly reposition the upper rack on the rails and slide it into position.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com