DescriptionThis video provides step-by-step repair instructions for replacing the water supply tube on a Samsung dishwasher. The most common reason for replacing the water supply tube is insufficient cleaning.
All of the information for this water supply tube replacement video is applicable to the following brands:
Samsung
Tools needed: none
Step-By-Step Instructions1
To replace the water supply tube in your dishwasher
2
First slide out the upper dish rack note where the dish rack is positioned on the rails then lift up the rack to remove it.
3
Now slide out the lower dish rack.
4
Next, detach the water supply tube assembly from the mounting brackets on the top and rear of the tub.
5
Now rotate the old water supply tube to release it from the pump assembly.
6
Prepare the new water supply tube for installation by transferring the upper wash arm and duct adapter from the old tube to the new one.
7
Now insert the bottom of the new water supply tube into the pump assembly and rotate the tube to secure.
8
Snap the new tube into the mounting brackets on the rear and top of the tub.
9
Replace the lower dish rack.
10
Correctly reposition the upper rack on the rails slide it into position and your dishwasher should be ready for use.