Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairSamsung Dishwasher Drain Hose Replacement #DD67-00059A
Samsung Dishwasher Drain Hose Replacement #DD67-00059A
Skill Level
Total Parts Cost
$60.46Estimated Savings
$112.5007:19
- Description
This video provides step-by-step repair instructions for replacing the drain hose on a Samsung dishwasher. The most common reason for replacing the drain hose is water leaking from the dishwasher.
All of the information for this drain hose replacement video is applicable to the following brands:
Samsung
Tools needed: phillips head screwdriver, flat head screwdriver, 5/8 inch wrench, 9/64 inch hex head screwdriver, pliers
All of the information for this drain hose replacement video is applicable to the following brands:
Samsung
Tools needed: phillips head screwdriver, flat head screwdriver, 5/8 inch wrench, 9/64 inch hex head screwdriver, pliers
Step By Step Instructions
1
To replace the drain hose in your dishwasher, you will need to uninstall the appliance first. To do this, turn off the power to your dishwasher
2
Shut off the water supply valve.
3
Use a phillips-head screwdriver to remove the screws securing the lower access panel.
4
Remove the panel.
5
Use a 5/8th inch wrench to help unthread the water supply line from the inlet valve be prepared for some water to spill.
6
Next, unthread the screw securing the junction box cover. Then pull the cover off.
7
Note the location of the wires then untwist the wire nuts to disconnect the wires.
8
Unthread the strain relief nut and detach the strain relief from the junction box.
9
Next, disconnect the drain hose from the sink drain or garbage disposer and feed it through the cabinet.
10
Open the dishwasher door and remove the mounting bracket screws.
11
To move the dishwasher, you may need to adjust the legs to lower the appliance.
12
You can lower the rear leveling leg by using a 9/64th inch hex-head screwdriver to rotate the adjustment rod at the front clockwise.
13
Now, very carefully pull the dishwasher away from the cabinet.
14
Use a large flat-head screwdriver to help release the drain hose retainer and push it into the base.
15
Use the phillips-head screwdriver to unthread the screws securing the left side access panel.
16
Remove the panel.
17
Next, release the spring clamp and pull the hose off of the water panel.
18
You can now pull the old hose through the base to remove.
19
Before you install the new drain hose transfer the spring clamp and the retainer from the old hose to the new one.
20
Make sure the retainer is positioned the same distance from the end of the hose as before.
21
Now feed the opposite end of the hose through the base and snap the retainer into place.
22
Attach the hose to the outlet port on the water panel and secure it with the spring clamp.
23
Replace the side access panel and secure it with the screws.
24
The larger screw goes in the back.
25
Make sure the drain hose is accessible through the cabinet wall and that the water supply and power supply lines are positioned in their respective channels in the dishwasher base then gently slide the dishwasher back into the cabinet.
26
Adjust the leveling legs if necessary.
27
Replace the screws to secure the mounting brackets to the cabinet or countertop.
28
Feed the drain hose through the cabinet and connect it to the sink drain or disposer.
29
Make sure the hose is elevated above the connection point.
30
Fully position the wire strain relief in the junction box and secure the strain relief nut.
31
Connect the wires using the wire nuts.
32
Align the cover and replace the screw to secure.
33
Reconnect the water supply line to the inlet valve.
34
Replace the lower access panel and secure it with the screws.
35
With the repair completed turn the water supply back on as well as the power and your dishwasher should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the drain hose on a Samsung dishwasher. The most common reason for replacing the drain hose is water leaking from the dishwasher.
All of the information for this drain hose replacement video is applicable to the following brands:
Samsung
Tools needed: phillips head screwdriver, flat head screwdriver, 5/8 inch wrench, 9/64 inch hex head screwdriver, pliers
All of the information for this drain hose replacement video is applicable to the following brands:
Samsung
Tools needed: phillips head screwdriver, flat head screwdriver, 5/8 inch wrench, 9/64 inch hex head screwdriver, pliers
Step-By-Step Instructions
1
To replace the drain hose in your dishwasher, you will need to uninstall the appliance first. To do this, turn off the power to your dishwasher
2
Shut off the water supply valve.
3
Use a phillips-head screwdriver to remove the screws securing the lower access panel.
4
Remove the panel.
5
Use a 5/8th inch wrench to help unthread the water supply line from the inlet valve be prepared for some water to spill.
6
Next, unthread the screw securing the junction box cover. Then pull the cover off.
7
Note the location of the wires then untwist the wire nuts to disconnect the wires.
8
Unthread the strain relief nut and detach the strain relief from the junction box.
9
Next, disconnect the drain hose from the sink drain or garbage disposer and feed it through the cabinet.
10
Open the dishwasher door and remove the mounting bracket screws.
11
To move the dishwasher, you may need to adjust the legs to lower the appliance.
12
You can lower the rear leveling leg by using a 9/64th inch hex-head screwdriver to rotate the adjustment rod at the front clockwise.
13
Now, very carefully pull the dishwasher away from the cabinet.
14
Use a large flat-head screwdriver to help release the drain hose retainer and push it into the base.
15
Use the phillips-head screwdriver to unthread the screws securing the left side access panel.
16
Remove the panel.
17
Next, release the spring clamp and pull the hose off of the water panel.
18
You can now pull the old hose through the base to remove.
19
Before you install the new drain hose transfer the spring clamp and the retainer from the old hose to the new one.
20
Make sure the retainer is positioned the same distance from the end of the hose as before.
21
Now feed the opposite end of the hose through the base and snap the retainer into place.
22
Attach the hose to the outlet port on the water panel and secure it with the spring clamp.
23
Replace the side access panel and secure it with the screws.
24
The larger screw goes in the back.
25
Make sure the drain hose is accessible through the cabinet wall and that the water supply and power supply lines are positioned in their respective channels in the dishwasher base then gently slide the dishwasher back into the cabinet.
26
Adjust the leveling legs if necessary.
27
Replace the screws to secure the mounting brackets to the cabinet or countertop.
28
Feed the drain hose through the cabinet and connect it to the sink drain or disposer.
29
Make sure the hose is elevated above the connection point.
30
Fully position the wire strain relief in the junction box and secure the strain relief nut.
31
Connect the wires using the wire nuts.
32
Align the cover and replace the screw to secure.
33
Reconnect the water supply line to the inlet valve.
34
Replace the lower access panel and secure it with the screws.
35
With the repair completed turn the water supply back on as well as the power and your dishwasher should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com