Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairElectrolux Washer Drive Belt Replacement #134616700
Electrolux Washer Drive Belt Replacement #134616700
Skill Level
Total Parts Cost
$59.49Estimated Savings
$112.5002:04
- Description
This video provides step-by-step repair instructions for replacing the drive belt on an Electrolux washing machine. The most common reasons for replacing the belt is if the tub will not spin or is making a loud noise.
All of the information for this drive belt replacement video is applicable to the following brands:
Electrolux
Tools needed: #2 square bit
All of the information for this drive belt replacement video is applicable to the following brands:
Electrolux
Tools needed: #2 square bit
Step By Step Instructions
1
Before you replace the drive belt in your washer be sure to unplug the power cord.
2
Use a number two square bit or a phillips-head screwdriver to unthread the screws securing the rear access panel Sharp Hazard
3
Set the panel aside
4
Carefully rotate the drive pulley to help remove the old belt if still intact.
5
Install the new drive belt by hooking it onto the motor shaft then loop the belt on the drive pulley and rotate the pulley to align the belt.
6
Reposition the rear access panel.
7
Thread and tighten the screws to secure.
8
With the repair completed plug the power cord back in and your washer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the drive belt on an Electrolux washing machine. The most common reasons for replacing the belt is if the tub will not spin or is making a loud noise.
All of the information for this drive belt replacement video is applicable to the following brands:
Electrolux
Tools needed: #2 square bit
All of the information for this drive belt replacement video is applicable to the following brands:
Electrolux
Tools needed: #2 square bit
Step-By-Step Instructions
1
Before you replace the drive belt in your washer be sure to unplug the power cord.
2
Use a number two square bit or a phillips-head screwdriver to unthread the screws securing the rear access panel Sharp Hazard
3
Set the panel aside
4
Carefully rotate the drive pulley to help remove the old belt if still intact.
5
Install the new drive belt by hooking it onto the motor shaft then loop the belt on the drive pulley and rotate the pulley to align the belt.
6
Reposition the rear access panel.
7
Thread and tighten the screws to secure.
8
With the repair completed plug the power cord back in and your washer should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com