Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairElectrolux Washing Machine Drive Pulley Replacement #137317100
Electrolux Washing Machine Drive Pulley Replacement #137317100
Skill Level
Total Parts Cost
$70.20Estimated Savings
$112.5002:48
- Description
This video provides step-by-step repair instructions for replacing the drive pulley on an Electrolux washing machine. The most common reasons for replacing the pulley are the drum not spinning or the washer running loudly.
All of the information for this drive pulley replacement video is applicable to the following brands:
Electrolux
Tools needed: phillips head screwdriver, #2 square bit, 6mm hex head socket
All of the information for this drive pulley replacement video is applicable to the following brands:
Electrolux
Tools needed: phillips head screwdriver, #2 square bit, 6mm hex head socket
Step By Step Instructions
1
Before you replace the drive pulley in your washer be sure to unplug the power cord.
2
Use a number two square bit or a phillips-head screwdriver to unthread the screws securing the rear access panel
3
Set the panel aside
4
Carefully rotate the drive pulley to help remove the belt.
5
Use a screwdriver to secure the drive pulley and a 6mm hex head socket to unthread the pulley mounting bolt.
6
Detach the old pulley.
7
Install the new drive pulley by aligning it on the tub shaft.
8
Thread and tighten the mounting bolt to secure.
9
Hook the belt on the motor shaft then loop the belt on the new pulley and rotate the pulley to align the belt.
10
Reposition the rear access panel.
11
Thread and tighten the screws to secure.
12
With the repair completed plug the power cord back in and your washer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the drive pulley on an Electrolux washing machine. The most common reasons for replacing the pulley are the drum not spinning or the washer running loudly.
All of the information for this drive pulley replacement video is applicable to the following brands:
Electrolux
Tools needed: phillips head screwdriver, #2 square bit, 6mm hex head socket
All of the information for this drive pulley replacement video is applicable to the following brands:
Electrolux
Tools needed: phillips head screwdriver, #2 square bit, 6mm hex head socket
Step-By-Step Instructions
1
Before you replace the drive pulley in your washer be sure to unplug the power cord.
2
Use a number two square bit or a phillips-head screwdriver to unthread the screws securing the rear access panel
3
Set the panel aside
4
Carefully rotate the drive pulley to help remove the belt.
5
Use a screwdriver to secure the drive pulley and a 6mm hex head socket to unthread the pulley mounting bolt.
6
Detach the old pulley.
7
Install the new drive pulley by aligning it on the tub shaft.
8
Thread and tighten the mounting bolt to secure.
9
Hook the belt on the motor shaft then loop the belt on the new pulley and rotate the pulley to align the belt.
10
Reposition the rear access panel.
11
Thread and tighten the screws to secure.
12
With the repair completed plug the power cord back in and your washer should be ready for use.
Applicable Product Model
Recommended Tools and Accessories
Cleaner
$7.62
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com