Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairHusqvarna Leaf Blower Carburetor Gasket Replacement #502845301
Husqvarna Leaf Blower Carburetor Gasket Replacement #502845301
Skill Level
Total Parts Cost
$5.96Estimated Savings
$112.5002:11
- Description
This video provides step-by-step repair instructions for replacing the carburetor gasket on a Husqvarna leaf blower. The most common reasons for replacing the carburetor gasket are when the leaf blower won’t start or runs poorly.
All of the information in this carburetor gasket replacement video is applicable to following brands: Husqvarna
Tools used: T-27 Torx bit
All of the information in this carburetor gasket replacement video is applicable to following brands: Husqvarna
Tools used: T-27 Torx bit
Step By Step Instructions
1
Before you replace the carburetor gasket on your leaf blower make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
Unthread the screws to release the air filter cover.
4
Remove the filter and the filter gasket.
5
Next, use a t-27 torx bit to unthread the carburetor mounting bolts.
6
Slide the old gasket off of the bolts if still intact.
7
Install the new carburetor gasket by sliding it onto the mounting bolts.
8
Thread the bolts into the insulator and tighten.
9
Reposition the air filter gasket in the housing and realign the air filter in the gasket.
10
Replace the cover and thread the screws to secure.
11
With the repair completed reattach the wire and boot to the spark plug. and your leaf blower should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the carburetor gasket on a Husqvarna leaf blower. The most common reasons for replacing the carburetor gasket are when the leaf blower won’t start or runs poorly.
All of the information in this carburetor gasket replacement video is applicable to following brands: Husqvarna
Tools used: T-27 Torx bit
All of the information in this carburetor gasket replacement video is applicable to following brands: Husqvarna
Tools used: T-27 Torx bit
Step-By-Step Instructions
1
Before you replace the carburetor gasket on your leaf blower make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
Unthread the screws to release the air filter cover.
4
Remove the filter and the filter gasket.
5
Next, use a t-27 torx bit to unthread the carburetor mounting bolts.
6
Slide the old gasket off of the bolts if still intact.
7
Install the new carburetor gasket by sliding it onto the mounting bolts.
8
Thread the bolts into the insulator and tighten.
9
Reposition the air filter gasket in the housing and realign the air filter in the gasket.
10
Replace the cover and thread the screws to secure.
11
With the repair completed reattach the wire and boot to the spark plug. and your leaf blower should be ready for use.
Applicable Product Model
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com