DescriptionThis video provides step-by-step repair instructions for replacing the fuel tank cap on a Husqvarna leaf blower. The most common reasons for replacing the cap are if it is damaged or missing.
All of the information in this fuel tank cap replacement video is applicable to following brands: Husqvarna
Tools used: none
Step-By-Step Instructions1
Before you replace the fuel tank cap on your leaf blower you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
2
If still intact, unthread the old fuel tank cap and pull the retainer free of the tank.
3
Install the new fuel tank cap by inserting the retainer into the tank then thread on the cap.
4
Reattach the wire and boot to the spark plug and your leaf blower should be ready for use.