Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairHusqvarna Leaf Blower Throttle Lever Replacement #512694901
Husqvarna Leaf Blower Throttle Lever Replacement #512694901
Skill Level
Total Parts Cost
$5.96Estimated Savings
$112.5002:31
- Description
This video provides step-by-step repair instructions for replacing the throttle lever on a Husqvarna leaf blower. The most common reasons for replacing the lever are if it is damaged or missing.
All of the information in this throttle lever replacement video is applicable to following brands: Husqvarna
Tools used: 10mm socket, phillips head screwdriver
All of the information in this throttle lever replacement video is applicable to following brands: Husqvarna
Tools used: 10mm socket, phillips head screwdriver
Step By Step Instructions
1
Before you replace the throttle lever in your leaf blower remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
2
Use a 10mm wrench to unthread the adjustment bolt safety cap.
3
Unthread the wing nut and remove the adjustment bolt.
4
Next, use a phillips-head screwdriver to unthread all of the screws securing the handle.
5
Separate the two halves of the handle.
6
You can now lift out the old throttle lever and rotate to detach it from the throttle cable.
7
Install the new throttle lever by first attaching the cable then slide the lever into place on the mounting pin.
8
Confirm that all of the components are in place then join the two halves of the handle together around the blower hose.
9
Replace all of the screws to secure.
10
Insert the adjustment bolt then tighten the wing nut.
11
Thread on the safety cap.
12
With the repair completed reattach the wire and boot to the spark plug and your leaf blower should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the throttle lever on a Husqvarna leaf blower. The most common reasons for replacing the lever are if it is damaged or missing.
All of the information in this throttle lever replacement video is applicable to following brands: Husqvarna
Tools used: 10mm socket, phillips head screwdriver
All of the information in this throttle lever replacement video is applicable to following brands: Husqvarna
Tools used: 10mm socket, phillips head screwdriver
Step-By-Step Instructions
1
Before you replace the throttle lever in your leaf blower remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
2
Use a 10mm wrench to unthread the adjustment bolt safety cap.
3
Unthread the wing nut and remove the adjustment bolt.
4
Next, use a phillips-head screwdriver to unthread all of the screws securing the handle.
5
Separate the two halves of the handle.
6
You can now lift out the old throttle lever and rotate to detach it from the throttle cable.
7
Install the new throttle lever by first attaching the cable then slide the lever into place on the mounting pin.
8
Confirm that all of the components are in place then join the two halves of the handle together around the blower hose.
9
Replace all of the screws to secure.
10
Insert the adjustment bolt then tighten the wing nut.
11
Thread on the safety cap.
12
With the repair completed reattach the wire and boot to the spark plug and your leaf blower should be ready for use.
Applicable Product Model
Parts Needed
Lever
$5.96
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com