Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairHusqvarna Leaf Blower Replace On/Off Switch Spring #512698401
Husqvarna Leaf Blower Replace On/Off Switch Spring #512698401
Skill Level
Total Parts Cost
$0.00Estimated Savings
$112.5002:52
- Description
This video provides step-by-step repair instructions for replacing the on/off switch spring on a Husqvarna leaf blower. The most common reason for replacing the spring is if it is broken and the leaf blower will not start or turn off.
All of the information in this switch spring replacement video is applicable to following brands: Husqvarna
Tools used: 10mm socket, phillips head screwdriver
All of the information in this switch spring replacement video is applicable to following brands: Husqvarna
Tools used: 10mm socket, phillips head screwdriver
Step By Step Instructions
1
Before you replace the on/off switch spring in your leaf blower remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
2
Use a 10mm wrench to unthread the adjustment bolt safety cap.
3
Unthread the wing nut and remove the adjustment bolt.
4
Next, use a phillips-head screwdriver to unthread all of the screws securing the handle.
5
Separate the two halves of the handle.
6
Lift off the switch lever and spring.
7
Unthread the screw to release the spring and wire.
8
Install the new switch spring by aligning the spring and the wire on the screw then thread the screw into the switch lever to secure.
9
Now align the assembly on the handle.
10
Confirm that all of the components are in place then join the two halves of the handle together around the blower hose.
11
Replace all of the screws to secure.
12
Insert the adjustment bolt.
13
Tighten the wing nut and thread on the safety cap.
14
With the repair completed reattach the wire and boot to the spark plug and your leaf blower should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the on/off switch spring on a Husqvarna leaf blower. The most common reason for replacing the spring is if it is broken and the leaf blower will not start or turn off.
All of the information in this switch spring replacement video is applicable to following brands: Husqvarna
Tools used: 10mm socket, phillips head screwdriver
All of the information in this switch spring replacement video is applicable to following brands: Husqvarna
Tools used: 10mm socket, phillips head screwdriver
Step-By-Step Instructions
1
Before you replace the on/off switch spring in your leaf blower remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
2
Use a 10mm wrench to unthread the adjustment bolt safety cap.
3
Unthread the wing nut and remove the adjustment bolt.
4
Next, use a phillips-head screwdriver to unthread all of the screws securing the handle.
5
Separate the two halves of the handle.
6
Lift off the switch lever and spring.
7
Unthread the screw to release the spring and wire.
8
Install the new switch spring by aligning the spring and the wire on the screw then thread the screw into the switch lever to secure.
9
Now align the assembly on the handle.
10
Confirm that all of the components are in place then join the two halves of the handle together around the blower hose.
11
Replace all of the screws to secure.
12
Insert the adjustment bolt.
13
Tighten the wing nut and thread on the safety cap.
14
With the repair completed reattach the wire and boot to the spark plug and your leaf blower should be ready for use.
Applicable Product Model
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com